Hunter 21623 Owner's Manual - Page 13

7 • Light/Speaker Assembly Installation (Continued) 7-11.To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight. Connect the black wire with a white stripe from the lower switch housing to the black wire from the light kit. Connect the white wire from the lower switch housing to the white wire from the light kit/ speaker. Secure all wire connections using wire connectors. 7-12.To attach the lower switch housing assembly to the fan, partially install two housing assembly screws into the upper switch housing. 7-13.Connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. 7-14.Align the notches in the sides of the lower switch housing with the screws on the upper switch housing. Twist the lower switch housing and the light kit/speaker assembly clockwise to lock the screws in place. Step 7-11 7-15.Install the third housing assembly screw. 7-16.Tighten all three screws securely. Housing Assembly Screw Upper Switch Housing Wire Connections Housing Assembly Screw Lower Switch Housing Notch Steps 7-14 - 7-16 Steps 7-12 - 7-15 13 45049-01 • 07/13/09 • Hunter Fan Company