Hunter 21648 Owner's Manual - Page 14
Installing the Light Fixture
View all Hunter 21648 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Installing the Light Fixture 7-9. Remove the switch housing cap and plug button from the lower switch housing. 7-10. Push the wires from the light kit through the hole in the center of the lower switch housing. 7-11. Screw the threaded rod of the light fixture into the lower switch housing. 7-12. Install the nut and washer from the end of the light fixture inside the lower switch housing. 7-13. Remove the wire connectors from the white wire and the red wire in the lower switch housing. CAUTION: Be sure no bare wires or wire strands are visible after making connections. Threaded Rod 7-14. Connect the white wire from the lower switch housing to the white wire from the light fixture. 7-15. Connect the red wire from the lower switch housing to the black wire from the light kit fixture. Lower Switch Housing Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. If lights do not appear to be operating properly, see the troubleshooting section. Steps 7-17 - 7-19 Cap Plug Button Step 7-21 14 41847-01 • 05/28/10 • Hunter Fan Company