Hunter 21730 Owner's Manual
Hunter 21730 Manual
 |
View all Hunter 21730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 21730 manual content summary:
- Hunter 21730 | Owner's Manual - Page 1
For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Model Name Model No. Date Purchased Where Purchased Type 2 Models Owner's Guide and Installation Manual English Español Form# 42672-01 20110302 ©2011 Hunter Fan Co. - Hunter 21730 | Owner's Manual - Page 2
Cleaning Your Ceiling Fan 13 9 • Troubleshooting 14 Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We - Hunter 21730 | Owner's Manual - Page 3
and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. Fan Support System • Fan attaches directly to building structure. • Fan support system will hold full weight of the fan and light kit. Ceiling Hole • The outlet box clearance - Hunter 21730 | Owner's Manual - Page 4
support service panel. 5-2. Thread the fan supply line through the outlet box so that the fan supply line extends at least 6" beyond the box. 5-3. Attach the fan ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the Ceiling - Hunter 21730 | Owner's Manual - Page 5
, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Ceiling Outlet Box For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4" diameter - Hunter 21730 | Owner's Manual - Page 6
To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct - Hunter 21730 | Owner's Manual - Page 7
pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64" in diameter. For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. 2-2. Your fan comes with four preinstalled - Hunter 21730 | Owner's Manual - Page 8
in the adapter. Assemble securely with three low profile screws. Hanging the Fan: Note: To hang the fan, you must tilt the canopy to an almost vertical position so that the canopy slots sit on the ceiling plate hooks. 3-7. Raise the fan and align the slots in the canopy with the hooks on the - Hunter 21730 | Owner's Manual - Page 9
and push them carefully back through the ceiling plate into the outlet box. 4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 9 42672-01 • 03/02/11 • Hunter Fan Company Wire Connector Dual Switch Wiring - Hunter 21730 | Owner's Manual - Page 10
hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate. WARNING: The slots in 5-3 Canopy Canopy Trim Ring Canopy Screw 10 42672-01 • 03/02/11 • Hunter Fan Company - Hunter 21730 | Owner's Manual - Page 11
. Insert the second blade mounting screw, then securely tighten both mounting screws. Step 6-1 (Detail) Grommet Note: The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to - Hunter 21730 | Owner's Manual - Page 12
to the white wire from the fan. Connect the black/white wire from the lower switch housing to the black wire from the fan. Note: Both plug connectors are Screw Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the - Hunter 21730 | Owner's Manual - Page 13
draw air upward (clockwise blade rotation) will distribute the warmer air trapped at the ceiling around the room without causing a draft. 8-5. The blades on this fan have been treated with Hunter's Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly - Hunter 21730 | Owner's Manual - Page 14
securely attached to the blade irons, follow the instructions in the enclosed balancing kit to balance the fan. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. Problem: Lights shut off suddenly, but fan is still operating 1. Check to make sure the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
Type 2 Models
Type 2 Models
Type 2 Models
Form# 42672-01
20110302
©2011 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English
Español
Owner’s Guide and Installation Manual