Hunter 21730 Owner's Manual - Page 12
Glass shade style
View all Hunter 21730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
7 • Completing Your Installation With a Multi-Staked Light Fixture 7-1. Connect the white wire from the lower switch housing to the white wire from the fan. Connect the black/white wire from the lower switch housing to the black wire from the fan. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. 7-2. Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. 7-3. To install each shade, first loosen the three thumbscrews. 7-4. Raise the shade to the light fixture. Tighten the thumbscrews securely. 7-5. Install B10 candelabra-based light bulbs (60 Watt maximum each). Note: Glass shade style and number of lights may vary. Steps 7-1 - 7-2 Upper Switch Housing Connectors Lower Switch Housing Housing Assembly Screw Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. Shade Bulb Thumbscrews Steps 7-4 - 7-5 12 42672-01 • 03/02/11 • Hunter Fan Company