Hunter 22710 Owner's Manual - Page 10

Switch Housing Finial 7 • Installing the Switch Housing Side Holes Steps 7-1 - 7-2 7-1. Connect the upper plug connector from the motor to the lower plug connector in the switch housing assembly. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. 7-2. To attach the switch housing, thread the screws through the side holes of the mounting plate and tighten them securely. Note: If you are installing the light fixture, proceed to 8 • Installing the Light Fixture. If you are not installing the light fixture, proceed with steps 7-3 - 7-4 to complete the installation. 7-3. Thread the finial with rod (from the sack parts) through the switch housing cap and into the switch housing. 7-4. Tighten the finial. Switch Housing Cap Steps 7-3 - 7-4 10 41968-01 • 10/02/08 • Hunter Fan Company