Hunter 23688 Owner's Manual - Page 9
Should you need to remove the canopy, trim ring, follow these steps
View all Hunter 23688 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6 • Installing the Canopy and Canopy Trim Ring 6-1. Holding the canopy, raise the fan off the hook. 6-2. Align the slots in the canopy with the tabs on the ceiling plate. 6-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the tabs on the ceiling plate totally engage with the slots in the canopy. 6-4. Loosely assemble the three canopy screws into the canopy one at a time. Once all three screws are in, tighten them. 6-5. Using both hands, push the canopy trim ring up to the top of the canopy. e canopy trim ring will snap and lock into place. Step 6-2 Canopy Ceiling Plate Canopy Trim Ring Should you need to remove the canopy trim ring, follow these steps: 1. Locate the tab indicators, small bumps on top of tabs. 2. Press firmly on opposite sides of the ring towards the canopy. e tabs 9 will flex out releasing the trim ring from the canopy. Steps 6-4 - 6-5 Step 6-3 41923-01 • 11/21/05 Canopy Screw Hunter Fan Company