Hunter 28665 Owner's Manual - Page 15

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Installing the Glass Bowl 7-8. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 7-9. Thread the light and fan pull chains through the hole in the center of the glass bowl. Then, thread the light pull chain through the hole in the center of the cover plate. 7-10. Thread the fan pull chain through the grommet hole in the side of the cover plate. 7-11. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl. 7-12. Thread the light pull chain through the finial and screw the finial onto the threaded rod end until tight. 7-13. Attach the extra pull chains (included) to the light and fan pull chains using the breakaway connector. Breakaway Connector Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. Light Bulb Socket (B10 Candelabra Based 60 Watt Maximum) Metal Disc Threaded Rod Glass Bowl Cover Plate Finial 15 45065-01 • 03/07/11 • Hunter Fan Company