Hunter 28678 Owner's Manual - Page 12

7 • Completing Your Installation With a Multi Staked Light Fixture Upper Switch Housing Housing Assembly Screw Plug Connector WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the lower switch housing assembly to the fan, partially install two housing assembly screws into the upper switch housing. 7-2. Connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. Steps 7-1 - 7-2 Housing Assembly Screw 7-3. Align the notches in the sides of the lower switch housing with the screws on the upper switch housing. Twist the lower switch housing assembly clockwise to lock the screws in place. 7-4. Install the third housing assembly screw. 7-5. Tighten all three screws securely. Notch Lower Switch Housing Steps 7-3 - 7-5 12 42437-01 • 06/08/10 • Hunter Fan Company