Hunter 28680 Owner's Manual - Page 12

7 • Completing Your Installation With a Bowl Light Fixture Upper Switch Housing Plug Connector Housing Assembly Screw WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the lower switch housing assembly to the fan, partially install two housing assembly screws into the upper switch housing. 7-2. Connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. 7-3. Align the notches in the sides of the lower switch housing with the screws on the upper switch housing. Twist the lower switch housing assembly clockwise to lock the screws in place. Steps 7-1 - 7-2 Housing Assembly Screw 7-4. Install the third housing assembly screw. 7-5. Tighten all three screws securely. Notch Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. If lights do not appear to be operating properly, see the troubleshooting section. Steps 7-3 - 7-5 Lower Switch Housing 12 42439-01 • 06/15/10 • Hunter Fan Company