Hunter 30057 Owner's Manual - Page 5

Cleaning and Filter Replacement, Replacement Filters - air purifier

Page 5 highlights

5 Cleaning and Filter Replacement 1. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water. Remove the pre-filter before cleaning the front grill. 2. At least every 90 days, replace the carbon pre-filter. This is necessary to maintain proper odor removing and overall filtration performance. If necessary, it can be changed more often. Mark the new filter installation sticker included with the new carbon pre-filter. Be sure to remove any plastic wrapping that may be on the new filter before you place it in the Air Purifier. 3. While replacing the pre-filter, you should view the condition of the HEPAtech® Filter. Compare the filter to the color coded chart that is on the inside of the housing. If the filter matches the dark color on the chart, you should remove the filter and replace it with a new filter. Mark the new filter installation sticker included with the new HEPAtech® Filter. Depending on use and environment, the HEPAtech® Filter should last four to six months. 4. Gently pull on the filter to remove it from the unit. While removing the filter, note the directional arrows printed on the top of the filter. The new filter will be installed with the same orientation. Once removed, the used filter can be discarded. 5. Remove the new filter from its wrapping and look at the directional arrows printed on the side of the filter. Install the filter with arrows pointing towards the unit. Press the filter firmly into the air purifier. To avoid damaging the filter media, you should press on the frame of the filter only. 6. If you notice a decrease in air output or an increase in noise, the HEPAtech® Filter may be clogged. Replace it with a new HEPAtech® Filter. Replacement Filters To obtain a replacement filter for your Air Purifier, call 1-800-4Hunter for your nearest retailer or Hunter Customer Service at (US) 1-888-8301326, (Canada) 1-866-268-1936. Please be prepared to tell the operator the model number of your Air Purifier and the model number of the filter you need to replace. Visit our website at www.hunterfan.com. Hunter Air Purifier Model No.: 30124A 30057A 30067A, 30061 Pre-Filter Replacement Model No.: 30901 30901 30901 HEPAtech® Filter Replacement Model No.: 30928 30928 30928 ©2010 Hunter Fan Company 08/18/2010

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

5
©2010 Hunter Fan Company
08/18/2010
Cleaning and Filter Replacement
1. Clean the outside of the unit with a soft, damp cloth. The front grill can be
removed and cleaned in soapy water. Remove the pre-filter before cleaning
the front grill.
2.
At least every 90 days, replace the carbon pre-filter.
This
is necessary to maintain proper odor removing and overall filtration
performance. If necessary, it can be changed more often. Mark the new
filter installation sticker included with the new carbon pre-filter.
Be sure to
remove any plastic wrapping that may be on the new filter
before you place it in the Air Purifier.
3. While replacing the pre-filter, you should view the condition of the
HEPAtech
®
Filter. Compare the filter to the color coded chart that is on the
inside of the housing. If the filter matches the dark color on the chart, you
should remove the filter and replace it with a new filter. Mark the new filter
installation sticker included with the new HEPAtech
®
Filter.
Depending
on use and environment, the HEPAtech
®
Filter should last
four to six months.
4. Gently pull on the filter to remove it from the unit. While removing the filter,
note the directional arrows printed on the top of the filter. The new filter will
be installed with the same orientation. Once removed, the used filter can be
discarded.
5. Remove the new filter from its wrapping and look at the directional arrows
printed on the side of the filter. Install the filter with arrows pointing towards
the unit. Press the filter firmly into the air purifier. To avoid damaging the
filter media, you should press on the frame of the filter only.
6. If you notice a decrease in air output or an increase in noise, the HEPAtech
®
Filter may be clogged. Replace it with a new HEPAtech
®
Filter.
Replacement Filters
To obtain a replacement filter for your Air Purifier, call 1-800-4Hunter
for your nearest retailer or Hunter Customer Service at (US) 1-888-830-
1326, (Canada) 1-866-268-1936. Please be prepared to tell the operator
the model number of your Air Purifier and the model number of the filter
you need to replace. Visit our website at www.hunterfan.com.
Hunter Air Purifier Model No.:
30057A 30067A, 30061
30124A
Pre-Filter Replacement Model No.:
30901
30901
30901
HEPAtech
®
Filter Replacement Model No.: 30928
30928
30928