Hunter 30225 User Guide - Page 13
Programming
![]() |
View all Hunter 30225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Programming Setting Day and Time Setting the correct day and time allows the programs to work effectively and provides a clock for your reference. Although the instructions for setting the day and time are listed under Initial Operation, they are repeated below for your convenience. Adjusting Day and Time: (For example, Wednesday at 3:45 pm) DAY 1. To set the day or time, press the DAY/TIME key. All TIME display features except the day and time will go blank and the hour will flash. Fig. 19 2. Use the UP/DOWN keys to adjust the hour. Tapping the key will advance the hour by increments of one. Holding down the key will change the hour rapidly. Note the AM/PM indicator as you cycle through a 24 hour period. DAY 3. Press the DAY/TIME key again. Now, the minutes will TIME be flashing. Use the UP/DOWN keys to adjust the minute. Tapping the key will change the minute by increments of one and holding the key will change the minute rapidly. Fig. 20 DAY 4. Press the DAY/TIME key to accept the minute setting TIME and go to the day of the week. Use the UP/DOWN keys to set the current day. DAY 5. Press the DAY/TIME key a final time to accept the day TIME setting and return to Normal mode. Fig. 21 41674-01_REV 3-11-05.pmd Continued Fig. 22 13 41674-01 13 3/11/05, 5:01 PM
![](/manual_guide/products/hunter-30225-user-guide-ac6d61c/13.png)