Hunter 30730 Owner's Manual - Page 12

To change the filter and reset the Filter Life Counter

Get Hunter 30730 PDF manuals and user guides View all Hunter 30730 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Air Purifier Maintenance To change the filter and reset the Filter Life Counter: 1. First, turn off and unplug the air purifier. 2. Next, remove the front grill. Place your fingers under the handle on the grill and pull forward, then up. Refer to Figs. 4 and 5 (pg. 6). 3. Gently pull on the filter to remove it from the unit. While removing the filter, note the directional arrows printed on the top of the filter. The new filter will be installed with the same orientation. Refer to Fig. 10. Once removed, the used filter can be discarded. 4. Look at the directional arrows printed on the side of the filter. Install the filter with arrows pointing towards the unit. Refer to Fig. 10. Press the filter firmly into the air purifier. To avoid damaging the filter media, you should press on the frame of the filter only. FILTER Fig. 10 5. Place the front grill back onto the unit. First, line up the tab on the bottom of the grill with the recess on the purifier base and then push the top of the grill forward until it is closed. Refer to Figs. 6 and 7, pg. 7. NOTE: This unit will not operate unless the grill is in the correct position. 6. Plug in the unit. 7. To reset the counter to zero hours and turn off the indicator, simply press and hold the FILTER RESET key for three seconds. Then, you must release the reset key and then press and hold the filter reset key again for three seconds to turn off the filter indicator. 41781-01 12 41781-01_rev 12.08.05B.pmd 12 12/8/05, 10:46 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
41781-01
12
Air Purifier Maintenance
FILTER
To change the filter and reset the Filter Life Counter:
1.
First, turn off and unplug the air purifier.
2.
Next, remove the front grill.
Place your fingers under the handle on the grill and
pull forward, then up. Refer to Figs. 4 and 5 (pg. 6).
3.
Gently pull on the filter to remove it from the unit. While removing the filter,
note the directional arrows printed on the top of the filter. The new filter will
be installed with the same orientation. Refer to Fig. 10. Once removed, the
used filter can be discarded.
4. Look at the directional arrows printed on the side of the filter. Install the
filter with arrows pointing towards the unit. Refer to Fig. 10. Press the
filter firmly into the air purifier. To avoid damaging the filter media, you
should press on the frame of the filter only.
5.
Place the front grill back onto the unit. First, line up the tab on the bottom
of the grill with the recess on the purifier base and then push the top of the
grill forward until it is closed. Refer to Figs. 6 and 7, pg. 7.
NOTE:
This
unit will not operate unless the grill is in the correct position.
6.
Plug in the unit.
7. To reset the counter to zero hours and turn off the indicator, simply press
and hold the FILTER RESET key for three seconds. Then, you must re-
lease the reset key and then press and hold the filter reset key again for
three seconds to turn off the filter indicator.
Fig. 10
41781-01_rev 12.08.05B.pmd
12/8/05, 10:46 AM
12