Hunter 30748 Owner's Manual - Page 12

Air Purifier Maintenance 3. Gently pull on the filter to remove it from the unit. While removing the filter, note the directional arrows printed on the top of the filter. The filter will be reinstalled with the same orientation. Refer to Fig. 10. 4. The label on the top side of the filter points to the side that should be cleaned. Refer to Fig. 10. With a vacuum cleaner and upholstery brush attachment, clean the filter until all particles are removed. Do not use water or liquids to clean. 5. Install the filter with arrows pointing towards the unit. Refer to Fig. 10. Press the filter firmly into the air purifier. To avoid damaging the filter media, you should press on the frame of the filter only. Filter Fig. 10 6. Place the front grill back onto the unit. First, line up the tab on the bottom of the grill with the recess on the purifier base and then push the top of the grill forward until it is closed. Refer to Figs. 6 and 7 (pg. 7). NOTE: This unit will not operate unless the grill is in the correct position. 7. Plug in the unit. 8. To reset the filter counter, press the FILTER RESET key for 2 seconds. The Filter Counter will return to 100% and the Filter indicator will stop flashing. 41555-011 12