Hunter 30793 Owner's Manual - Page 5

Months, Months - air purifier

Page 5 highlights

Filter Replacement Filter Change Calendar: The filter calendar is designed to optimize the performance of the air purifer by reminding you when to check the PERMAlife® and Pre-filters. It is located around the speed control dial. Pre-filter Calendar: The outer knob of the filter change calendar is the pre-filter counter. To use, align the pre-filter symbol ( ) on the ring with the month that you installed the pre-filter. The inspection symbol ( ) on the outer knob points to the month in which you should check the pre-filter for wear. The pre-filter is designed for 3 months of usage. Replacing or checking the pre-filter ( ) in May means the filter would need to be checked again ( ) in August. Figure 4. The Pre-filter is secured to the inside of the front grill with hook tape. To change pre-filter, remove the front grill, Figure 1, and gently remove the pre-filter from the unit. Secure the new filter to the hook tape and replace the front grill. Figure 4. checked again ( ) in August. Figure 5. to check the filter, remove the front grill, Figure 1, and gently remove the Permalife filter from the unit. NOTE: Remember the orientation of the filter when removing. Your new filter will be inserted in the same manner. Secure the new filter inside the unit and replace the front grill. Figure 5. 6 Months Cleaning NOTE: To avoid the risk of electric shock, the unit should be unplugged before cleaning. 3 Months 1. Clean the outside of the unit with a soft, damp cloth. The front grill can be cleaned in soapy water after it has been removed from the unit and the pre-filter has been removed. See Figure 1. Permalife® Filter Calendar: The PERMAlife® Filter indicator is located in the center of the calendar ring. To set the PERMAlife Filter counter, rotate the calendar ring to align the filter symbol ( ) with the month that you checked/replaced the filter. Since the filter is designed for 6 months of use, the second indicator ( ) will serve as a reminder to clean the filter every 6 months. If the PERMAlife® filter ( ) is checked in February, then the filter would need to be NOTE: Ensure the grill is completely dry before reinstalling it on the unit. Failure to do so could cause damage to the filters or motor. 2. At least every 90 days, open the front grill, remove the carbon pre-filter, and replace it. This is necessary to maintain proper odorremoving and overall filtration performance. If necessary, it can be changed more often. Remember to change the Pre-Filter Calendar Dial to reflect the new Pre-Filters installation and to remove any plastic wrapping that may be on the new filter before you place it into the Air Purifier. ©2010 Hunter Fan Co. 5 44094-01 20101410

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

5
©2010 Hunter Fan Co.
44094-01
20101410
Permalife
®
Filter Calendar
: The PERMAlife
®
Filter indicator is located in the center of
the calendar ring. To set the PERMAlife
Filter counter, rotate the calendar ring to
align the filter symbol (
) with the month
that you checked/replaced the filter. Since
the filter is designed for 6 months of use,
the second indicator (
) will serve as a
reminder to clean the filter every 6 months.
If the PERMAlife
®
filter (
) is checked in
February, then the filter would need to be
FILTER REPLACEMENT
Filter Change Calendar
: The filter calendar
is designed to optimize the performance of
the air purifer by reminding you when to check
the PERMAlife
®
and Pre-filters. It is located
around the speed control dial.
Pre-filter Calendar
:
The outer knob of the
filter change calendar is the pre-filter counter.
To use, align the pre-filter symbol (
) on
the ring with the month that you installed the
pre-filter. The inspection symbol (
) on
the outer knob points to the month in which
you should check the pre-filter for wear. The
pre-filter is designed for 3 months of usage.
Replacing or checking the pre-filter (
) in May means the filter would need to be
checked again (
) in August. Figure 4.
The Pre-filter is secured to the inside of the
front grill with hook tape. To change pre-filter,
remove the front grill, Figure 1, and gently
remove the pre-filter from the unit. Secure the
new filter to the hook tape and replace the
front grill.
NOTE
: To avoid the risk of electric shock, the
unit should be unplugged before cleaning.
1. Clean the outside of the unit with a soft,
damp cloth. The front grill can be cleaned
in soapy water after it has been removed
from the unit and the pre-filter has been
removed. See Figure 1.
NOTE
: Ensure the grill is completely dry
before reinstalling it on the unit. Failure to
do so could cause damage to the filters or
motor.
2. At least every 90 days, open the front grill,
remove the carbon pre-filter, and replace it.
This is necessary to maintain proper odor-
removing and overall filtration performance.
If necessary, it can be changed more
often. Remember to change the Pre-Filter
Calendar Dial to reflect the new
Pre-Filters installation and to remove any
plastic wrapping that may be on the new
filter before you place it into the Air Purifier.
CLEANING
6 Months
Figure 5.
3 Months
Figure 4.
checked again (
) in August. Figure 5.
to check the filter, remove the front grill,
Figure 1, and gently remove the Permalife
filter from the unit.
NOTE:
Remember the orientation of the filter
when removing. Your new filter will be inserted
in the same manner.
Secure the new filter inside the unit and
replace the front grill.