Hunter 40135 Owner's Manual - Page 25
My system continues to operate when the, thermostat is in the off position.
View all Hunter 40135 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
1. My heating or cooling will not turn on or off. 1 a. Check the HE/HG switch to ensure it is set to the correct position. 1 b. Wait. There may be as much as a 4-minute delay before the system turns on or off to protect the compressor. 1 c. Check the circuit breakers and switches to ensure there is enough power to the system. 1 d. Replace the batteries with fresh AA alkaline batteries. 1 e. If applicable, make sure the furnace blower door is closed properly. 1 f. If your system has 4 wires, ensure the jumper wire is installed between the RC and RH terminals. 2. My system continues to operate when the thermostat is in the off position. 2 a. Replace unit. 25
25
1. My heating or cooling will not turn on or off.
1 a. Check the HE/HG switch to ensure it is set to the correct
position.
1 b. Wait. There may be as much as a 4-minute delay before
the system turns on or off to protect the compressor.
1 c. Check the circuit breakers and switches to ensure there is
enough power to the system.
1 d. Replace the batteries with fresh AA alkaline batteries.
1 e. If applicable, make sure the furnace blower door is closed
properly.
1 f. If your system has 4 wires, ensure the jumper wire is
installed between the RC and RH terminals.
......................................................................................
2. My system continues to operate when the
thermostat is in the off position.
2 a. Replace unit.