Hunter 44272 Owner's Manual - Page 16

Scheduling Setting Your Schedule 5 5. Use the or buttons to adjust the start time on the left of the screen for the period and press Next . Again you will use the or buttons to adjust the end time on the right of the screen for this scheduled period. Press Next again. 6. Set the temperature for your heating cycle as indicated by the flashing heat to arrow on your screen. Use the and buttons to change the temperature and press Next . You will be asked to set your cooling cycle, indicated by the flashing the cool to arrow. Set this temperature with your or buttons and hit . Next 7. The thermostat will start this process again for "Asleep". Repeat steps 1-5 to schedule the time and set the temperature for your sleep period. When finished pressed Next to get to "At Home". 8. When setting "At Home", you will only be asked to set a temperature. The thermostat calculates your "At Home" time by what remains unscheduled from your "Away" and "Asleep" periods. Set your "Heat To" temperature first and press Next , then Set your "Cool To" temp and press Next To finish Scheduling. 9. If you are scheduling the day periods in order (Weekdays, Saturday, then Sunday), the screen will flash "Updated!"and take you to the next period. 10. When you have completed all scheduling, press to finish. Done/ Home 11. If you skipped a section, or are only programming a weekend day, the Thermostat will show "Updated!" and return you to the Home screen. 16 44033-01 • 05/11/2010