Husqvarna 122C Owners Manual - Page 10
Assembly - diagram
View all Husqvarna 122C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ASSEMBLY Fitting the loop handle • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. • Hold the dust cup with a spanner to prevent the shaft from rotating. • Screw the trimmer head onto the shaft. Assembling and dismantling the two-piece shaft (122LDx-series) • Fit the bolt, securing plate and wing nut as shown in the diagram. Tighten the wing nut. Fitting the trimmer guard and trimmer head • Fit the guard as shown in the diagram. Tighten securely. Assembly: • Loosen the coupling by turning the knob. • Align the tab of the attachment (A) with the arrow on the coupling (B). B A • Push the attachment into the coupling until the attachment snaps into place. • Fit the dust cup on the shaft. The nut must be completely covered by the dust cup. Before using the unit, tighten the knob securely. 10 - English