Husqvarna 122HD60 Owners Manual - Page 14

WORKING TECHNIQUES General working instructions Safety instructions while working IMPORTANT! This section takes up the basic safety precautions for working with a hedge trimmer. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service workshop. Avoid all usage which you consider to be beyond your capability. • Always ensure you have a safe and stable working position. • Never leave the machine unsupervised with the motor running. • Always use both hands to hold the machine. Hold the machine in front of your body. ! WARNING! The machine can cause serious personal injury. Read the safety instructions carefully. Learn how to use the machine. WARNING! Cutting tool. Do not touch the ! tool without first switching off the engine. Safety instructions regarding the surroundings • Never allow children to use the machine. • Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment. • Ensure that no-one comes closer than 15 m while you are working. • Never allow anyone else to use the machine without first ensuring that they have understood the contents of the operator's manual. • Never work from a ladder, stool or any other raised position that is not fully secured. • Keep in mind that the operator is responsible for accidents or hazards occuring to other people or their property. • Make sure that your hands and feet do not come near the cutting attachment when the engine is running. • When the engine is switched off, keep your hands and feet away from the cutting attachment until it has stopped completely. • Watch out for stumps of branches that can be thrown out during cutting. • Do not cut too close to the ground. Stones and other objects can be thrown out. • Check the working area for foreign objects such as electricity cables, insects and animals, etc, or other objects that could damage the cutting attachment, such as metal items. • If any foreign object is hit or if vibrations occur stop the machine immediately. Disconnect the HT lead from the spark plug. Check that the machine is not damaged. Repair any damage. • If anything jams in the blades while you are working, switch off the engine and wait until it has stopped completely before cleaning the blades. Disconnect the HT lead from the spark plug. 14 - English 1153993-49 Rev 2. 2012-03-21