Husqvarna 128LD Owners Manual - Page 22

TECHNICAL DATA Technical data Engine Cylinder volume, cu.in./cm3 Cylinder bore, inch/mm Stroke, inch/mm Idle speed, rpm Recommended max. speed, rpm Speed of output shaft, rpm Max. engine output, acc. to ISO 8893, hp/kW Catalytic converter muffler Speed--regulated ignition system 128CD 1.7/28 1.4/35 1.130/28.7 2,800--3,200 10,000 8,000 1.1/0.8 Yes Yes 128LD 1.7/28 1.4/35 1.130/28.7 2,800--3,200 11,000 8,000 1.1/0.8 Yes Yes Ignition system Manufacturer/type of ignition system Spark plug Electrode gap, inch/mm Walbro/CD Champion RCJ--6Y 0.024/0.6 Walbro/CD Champion RCJ--6Y 0.024/0.6 Fuel and lubrication system Manufacturer/type of carburetor Fuel tank capacity, US pint/liter Zama 0.85/0.4 Zama 0.85/0.4 Weight Weight without fuel, cutting attachment and guard, lbs/kg 10/4.4 11/4.8 Sound levels (see note 1) Equivalent sound pressure level at the user's ear, measured according to ANSI B175.3--1997, dB(A), min/max: 94/97 94/97 Vibration levels Vibration levels at handles, measured according to ANSI B175.3--1997, m/s2 At idle, left/right handles: 3/5 3/5 At max. speed, left/right handles: 9/8 9/8 Note 1: Equivalent noise pressure level is calculated as the time--weighted energy total for noise pressure levels under various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed. NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting equipment fitted. The table indicates the highest and lowest values. These attachments used in combination with the specified powerhead have been evaluated to ANSI B175.3--2003, "Grass Trimmers and Brushcutters -- Safety Requirements". These combinations have been evaluated by Underwriter's Laboratories Inc. (UL) and are consequently UL listed: Model 128CD (3/8 RH arbor shaft thread) Approved accessories Type Cutting attachment / guard, part. no. Trimmer head TNG7 537 41 92-14 / 545 03 11-01 Model 128LD (M10 LH arbor shaft thread) Approved accessories Type Cutting attachment / guard, part. no. Trimmer head T25 537 33 83-06 / 545 03 09-01 Plastic blades Tricut 300 mm 531 00 38--11 / 545 03 09-01 These accessories used in combination with the specified powerheads have been evaluated to applicable ISO-- and EN safety requirement standards by the Swedish Machinery Testing Institute: Attachments Part. no. Edger attachment with shaft 952 711 607 Cultivator attachment with shaft 952 711 608 Blower attachment with shaft 952 711 609 Brushcutter attachment with shaft 952 711 610 Pruner attachment with shaft 952 711 612 115275126 Rev. 1 9/15/09 English--- 22