Husqvarna 223L Owners Manual

Husqvarna 223L Manual

Husqvarna 223L manual content summary:

  • Husqvarna 223L | Owners Manual - Page 1
    Operator's manual (EPA) 223L Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English
  • Husqvarna 223L | Owners Manual - Page 2
    for certain markets. The engine is switched off by moving the stop switch to the stop position. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or
  • Husqvarna 223L | Owners Manual - Page 3
    the trimmer guard and trimmer head 10 FUEL HANDLING Fuel safety 11 Fuel 11 Fueling 12 STARTING AND STOPPING Check before starting 13 Starting and stopping 13 WORKING TECHNIQUES General working instructions 15 MAINTENANCE Carburetor 17 Muffler 18 Cooling system 18 Spark plug 19 Air filter
  • Husqvarna 223L | Owners Manual - Page 4
    . Your purchase gives you access to professional help with repairs and service whenever this may be necessary. If the retailer who sells for a long time. Think of this operator′s manual as a valuable document. By following its′ content (using, service, maintenance etc) the life span and the second-
  • Husqvarna 223L | Owners Manual - Page 5
    attachment guard 5 Shaft 6 Loop handle 7 Throttle control 8 Stop switch 9 Throttle lock 10 Cylinder cover 11 Starter handle 12 Fuel tank 13 Choke control 14 Air purge 15 Air filter cover 16 Handle adjustment 17 Drive disc 18 Operator's manual 19 Allen key 20 Locking pin 21 Spark plug cap and spark
  • Husqvarna 223L | Owners Manual - Page 6
    with a spring-loaded stop switch and can be started by low speed and force on the starter handle, even small children under some circumstances can produce the force necessary to start the machine. This can mean a risk of serious personal injury. Therefore remove the spark plug cap when the
  • Husqvarna 223L | Owners Manual - Page 7
    cutting attachment rotates with the throttle in the idle position then the carburettor idle setting must be checked. See instructions under the heading Maintenance. Stop switch Use the stop switch to switch off the engine. Start the engine and make sure the engine stops when you move the stop switch
  • Husqvarna 223L | Owners Manual - Page 8
    cutting attachment. Check that the guard is undamaged and not cracked. Replace cord or an incorrect cutting attachment increases the level of vibration. See instructions under the heading Cutting equipment. The machine′s vibration damping system reduces the transfer of vibration between the engine
  • Husqvarna 223L | Owners Manual - Page 9
    . Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it. WARNING! A faulty cutting attachment may ! increase the risk of accidents. Trimmer head IMPORTANT! Always ensure the trimmer cord is wound tightly and
  • Husqvarna 223L | Owners Manual - Page 10
    bolt (L). • Fit the screw, securing plate and wing nut as shown in the diagram. • Tighten the wing nut. Fitting the trimmer head When fitting the cutting attachment it is extremely important that the raised section on the drive disc/support flange engages correctly in the centre hole of the cutting
  • Husqvarna 223L | Owners Manual - Page 11
    that a complete service is carried out before long-term storage. • The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage. • In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long
  • Husqvarna 223L | Owners Manual - Page 12
    precautions, ! will lessen the risk of fire: Do not smoke or place hot objects near fuel. Always shut off the engine before refuelling. Always stop the engine and let it cool for a few minutes before refuelling. When refuelling, open the fuel cap slowly so that any excess pressure is released
  • Husqvarna 223L | Owners Manual - Page 13
    trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the starter handle, slowly pull out the cord
  • Husqvarna 223L | Owners Manual - Page 14
    spark plug cap. Stopping The engine is switched off by moving the stop switch to the stop position. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking
  • Husqvarna 223L | Owners Manual - Page 15
    side of your body. 7 Keep the cutting attachment below waist level. 8 Switch off the engine before moving to another area. Fit the transport can result in serious injury. Stop the engine and cutting equipment before you remove material that has wound around the blade shaft as otherwise there is a
  • Husqvarna 223L | Owners Manual - Page 16
    and move the tool to and fro. • The cord can easily remove grass and weeds up against walls, fences, trees and borders, however by shortening the cord to 10-12 cm and reducing the engine speed. Clearing • The clearing technique removes all unwanted vegetation. Keep the trimmer head just above the
  • Husqvarna 223L | Owners Manual - Page 17
    the climate, altitude, fuel and the type of 2-stroke oil. • The carburetor has three adjustment controls: L = Low speed jet H = High speed jet T = Idle adjustment screw WARNING! If the idle speed cannot be ! adjusted so that the cutting attachment stops, contact your dealer/service workshop. Do
  • Husqvarna 223L | Owners Manual - Page 18
    should therefore remove the cutting attachment, nut, support flange and drive disc before adjusting the high speed jet H. The high speed jet H is adjusted correctly when the machine burbles a little. If the machine races then the setting is too lean. If the engine produces a lot of smoke and burbles
  • Husqvarna 223L | Owners Manual - Page 19
    influenced by: • Incorrect carburetor adjustment. • An incorrect fuel mixture (too much or incorrect type of oil). • A dirty air filter. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties. If the machine is low on power, difficult
  • Husqvarna 223L | Owners Manual - Page 20
    the engine, tank or fuel lines. X Check the starter and starter cord. Check that the vibration damping elements are not damaged. Clean the outside of the spark plug. Remove it and check the electrode gap. Adjust the gap to 0.5 mm (.20"), or replace the spark plug. Check that the spark plug is
  • Husqvarna 223L | Owners Manual - Page 21
    highest and lowest values. 223L Approved accessories Arbor shaft thread M10 Plastic blades Trimmer head Approved accessories J-handle set including grass blade Grass 255-4 1" (Ø 255 4-teeth) Type Tricut Ø 300 mm Trimmy Fix T25 T35 S35 Art No. 537 04 85-04 Cutting attachment guard, Art. no. 503
  • Husqvarna 223L | Owners Manual - Page 22
    without charge to the owner if the part is under warranty. EMISSION CONTROL WARRANTY PARTS LIST 1 Carburetor and internal parts 2 Intake pipe, airfilter holder and carburetor bolts. 3 Airfilter and fuelfilter covered up to maintenance schedule. 4 Ignition System 1 Spark Plug, covered up to maintenance
  • Husqvarna 223L | Owners Manual - Page 23
  • Husqvarna 223L | Owners Manual - Page 24
    2,0-2,4 mm .079-.095" T25 1 4 2 5 3 6,0 m 18' 10 cm 4" 3,05 m 9' 6 7 15 cm 6" 9 8 "Clic"
  • Husqvarna 223L | Owners Manual - Page 25
    2,4-2,7 mm .095-.106" T35 1 4 2 5 3 8,5 m 28' 10 cm 4" 4,3 m 14' 6 7 15 cm 6" 9 8 "Clic"
  • Husqvarna 223L | Owners Manual - Page 26
    2,4-2,7 mm .095-.106" S35 1 4 2 5 3 8,5 m 28' 10 cm 4" 4,2 m 14' 6 7 8 "Clic" 10 11 15 cm 6" ´´®®zz++RR''==¶¶55QQ¨¨
  • Husqvarna 223L | Owners Manual - Page 27
    S35 1 3 2 2,4-2,7 mm .095-.106" 4,25 m 14' 4 4,25 m 14' 5 15 cm 6" A B 15 cm 6"
  • Husqvarna 223L | Owners Manual - Page 28
    1150072-95 ´´®®zz++RR''==¶¶55QQ¨¨ 2006-01-18
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

English
223L
Oper
ator’s manual (EPA)
Please r
ead the operator’s manual carefully and make sure you
understand the instructions before using the machine.