Husqvarna 226HS75S Owners Manual - Page 17

Storage, Disposal, Troubleshooting guide

Page 17 highlights

English Storage 1. Oil the blade to prevent rust. 2. Empty the fuel tank and put the cap back on. 3. Remove the spark plug, pour a small amount of oil into the cylinder. 4. Rotate the crankshaft several times using the starting rope in order to distribute the oil. Put the spark plug back in. 5. Wrap the engine with a plastic sheet. 6. Store the trimmer indoors in a dry place, dust free place, out of the reach of children, preferably not in direct contact with the floor and away from heat sources. Disposal When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. Troubleshooting guide Case 1. Starting failure CHECK fuel tank fuel filter carburetor adjustment screw sparking (no spark) spark plug PROBABLE CAUSES ➞ incorrect fuel ➞ fuel filter is clogged ➞ out of normal range ➞ spark plug is fouled/wet ➞ plug gap is incorrect ➞ disconnected ACTION ➞ drain it and with correct fuel ➞ clean ➞ adjust to normal range ➞ clean/dry ➞ correct (GAP: 0.6 - 0.7 mm) ➞ retighten Case 2. Engine starts but does not keep running/Hard re-starting. CHECK fuel tank carburetor adjustment screw muffler,cylinder (exhaust port) air cleaner cylinder fin, fan cover PROBABLE CAUSES ➞ incorrect fuel or staled fuel ➞ out of normal range ➞ carbon is built-up ➞ clogged with dust ➞ clogged with dust ACTION ➞ drain it and with correct fuel ➞ adjust to normal range ➞ wipe away ➞ wash ➞ clean When your unit seems to need further service, please consult with our service shop in your area. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

17
English
17
English
Troubleshooting guide
Case 1. Starting failure
CHECK
PROBABLE CAUSES
ACTION
fuel tank
incorrect fuel
drain it and with correct fuel
fuel filter
fuel filter is clogged
clean
carburetor adjustment screw
out of normal range
adjust to normal range
sparking (no spark)
spark plug is fouled/wet
clean/dry
plug gap is incorrect
correct (GAP: 0.6 – 0.7 mm)
spark plug
disconnected
retighten
Case 2. Engine starts but does not keep running/Hard re-starting.
CHECK
PROBABLE CAUSES
ACTION
fuel tank
incorrect fuel or staled fuel
drain it and with correct fuel
carburetor adjustment screw
out of normal range
adjust to normal range
muffler,cylinder (exhaust port)
carbon is built-up
wipe away
air cleaner
clogged with dust
wash
cylinder fin, fan cover
clogged with dust
clean
When your unit seems to need further service, please consult with our service shop in your area.
Storage
Disposal
1. Oil the blade to prevent rust.
2. Empty the fuel tank and put the cap back on.
3. Remove the spark plug, pour a small amount of oil into the cylinder.
4. Rotate the crankshaft several times using the starting rope in order to distribute the oil. Put the spark plug back in.
5. Wrap the engine with a plastic sheet.
6. Store the trimmer indoors in a dry place, dust free place, out of the reach of children, preferably not in direct contact with the
floor and away from heat sources.
When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.