Husqvarna 3120 XP Owners Manual - Page 9

2 Throttle lock SAFETY INSTRUCTIONS 4 Right hand guard 1 Make sure the throttle control is locked at the idle setting when you release the throttle lock. Check that the right hand guard is not damaged and that there are no visible defects, such as cracks. 2 Press the throttle lock and make sure it returns to its original position when you release it. 3 Check that the throttle control and throttle lock move freely and that the return springs work properly. 4 Start the saw and apply full throttle. Release the throttle control and check that the chain stops and remains stationary. If the chain rotates when the throttle is on idle setting you should check the carburetor idle adjustment. See the section on "Maintenance". 3 Chain catcher Check that the CHAIN CATCHER is not damaged and is firmly attached to the body of the saw. 5 Vibration damping system Regularly check the vibration damping units for cracks or deformation Make sure the vibration damping units are securely attached to the engine unit and handles. 6 Stop switch Start the engine and make sure the engine stops when you move the stop switch to the stop setting. 9 English -