Husqvarna 323L Owners Manual

Husqvarna 323L Manual

Get Husqvarna 323L PDF manuals and user guides View all Husqvarna 323L manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna 323L manual content summary:

  • Husqvarna 323L | Owners Manual - Page 1
    Operator's manual (EPA I and II) 323L 325CX-SERIES Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English
  • Husqvarna 323L | Owners Manual - Page 2
    trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions starting, the spark plug cap must be removed from the spark plug when assembling, checking
  • Husqvarna 323L | Owners Manual - Page 3
    the trimmer guard and trimmer head 11 FUEL HANDLING Fuel safety 12 Fuel 12 Fueling 13 STARTING AND STOPPING Check before starting 14 Starting and stopping 15 WORKING TECHNIQUES General working instructions 16 MAINTENANCE Carburetor 18 Muffler 19 Cooling system 20 Spark plug 20 Air filter
  • Husqvarna 323L | Owners Manual - Page 4
    chain saws in 1959, and it is within this area Husqvarna is working today. Today Husqvarna is one of the leading manufacturers in the world of forest industry. Your purchase gives you access to professional help with repairs and service whenever this may be necessary. If the retailer who sells your
  • Husqvarna 323L | Owners Manual - Page 5
    Trimmer head 2 Grease filler cap, bevel gear 3 Bevel gear 4 Cutting attachment guard 5 Shaft 6 Loop handle 7 Throttle control 8 Stop switch 9 Throttle lock 10 Cylinder cover 11 Starter handle 12 Fuel tank 13 Choke control 14 Air purge 15 Air filter cover 16 Handle adjustment 17 Locking nut 18 Support
  • Husqvarna 323L | Owners Manual - Page 6
    , maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance. All covers and guards must be fitted before starting. Ensure that the spark plug cap and
  • Husqvarna 323L | Owners Manual - Page 7
    professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent. See instructions under the heading Start. Start the machine and apply full throttle. Release the throttle and check that the cutting attachment
  • Husqvarna 323L | Owners Manual - Page 8
    servicing your machine. Never use a machine that has a faulty muffler. Use of incorrectly wound cord or an incorrect cutting attachment increases the level of vibration. See instructions under the heading Cutting equipment. The machine′s vibration damping system from the user. A with a spark arrestor
  • Husqvarna 323L | Owners Manual - Page 9
    has stopped completely and disconnect the HT lead from the spark plug before you start to work on it. WARNING! A faulty cutting attachment may ! increase the risk of accidents. Trimmer head IMPORTANT! Always ensure the trimmer cord is wound tightly and evenly around the drum, otherwise
  • Husqvarna 323L | Owners Manual - Page 10
    Fit the nut, washer and screw. • Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob. Fitting the trimmer head When fitting the cutting attachment it is extremely important that the raised section on the drive disc/support flange engages correctly in the centre hole of
  • Husqvarna 323L | Owners Manual - Page 11
    and cutting attachments (323L) Fitting the trimmer guard and trimmer head (325Cx) • Fit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (L). • Fit the guard as shown in the diagram. Tighten
  • Husqvarna 323L | Owners Manual - Page 12
    that a complete service is carried out before long-term storage. • The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage. • In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long
  • Husqvarna 323L | Owners Manual - Page 13
    gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline. • Mix (shake) the fuel mixture thoroughly before filling the machine's fuel tank. • Do not mix more than one month's supply of fuel at a time. • If the machine is not used for
  • Husqvarna 323L | Owners Manual - Page 14
    before starting • Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked. WARNING! When the engine is started with ! the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately
  • Husqvarna 323L | Owners Manual - Page 15
    15 metres. Starting Primer bulb: Press the primer bulb repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged
  • Husqvarna 323L | Owners Manual - Page 16
    and cutting equipment before you remove material that has wound around the blade shaft as otherwise there is a risk of injury. The bevel gear can get hot during use the guard and cutting attachment. Always stop the engine before cleaning. Grass trimming with a trimmer head 4 Switch off the
  • Husqvarna 323L | Owners Manual - Page 17
    Clearing • The clearing technique removes all unwanted vegetation. Keep the trimmer head just above the ground and tilt throttle so that the cord lasts longer and to reduce the wear on the trimmer head. Cutting • The trimmer is ideal for cutting grass that is difficult to reach using a normal
  • Husqvarna 323L | Owners Manual - Page 18
    are mixed in the carburetor. The air/ fuel mixture is adjustable. Correct adjustment is essential to get the best performance from the machine. • The setting of the carburetor means that the engine is adapted to local conditions, for example, the climate, altitude, fuel and the type of 2-stroke oil
  • Husqvarna 323L | Owners Manual - Page 19
    H jets are set too rich it will results in acceleration problems or too low a working speed. Muffler WARNING! If the idle speed cannot be adjusted so that the cutting attachment stops, contact your dealer/service workshop. Do not use the machine until it has been correctly adjusted or repaired. High
  • Husqvarna 323L | Owners Manual - Page 20
    and cylinder. Spark plug The spark plug condition is influenced by: • Incorrect carburetor adjustment. • An incorrect fuel mixture (too much or incorrect type of oil). • A dirty air filter. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting
  • Husqvarna 323L | Owners Manual - Page 21
    except if repairs are carried out. CAUTION! Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others. Your warranty does not cover damage or liability caused by the use of accessories and/or attachments not speci
  • Husqvarna 323L | Owners Manual - Page 22
    engine, tank or fuel lines. Check the starter and starter cord. Check that the vibration damping elements are not damaged. Clean the outside of the spark plug. Remove it and check the electrode gap. Adjust the gap to 0.5 mm (.20"), or replace the spark plug. Check that the spark plug is fitted with
  • Husqvarna 323L | Owners Manual - Page 23
    system Spark plug Electrode gap, inch/mm Fuel and lubrication system Manufacturer/type of carburetor Fuel tank capacity, US pint/litre Weight Weight without fuel, cutting attachment and guard, Lbs/kg Sound levels (see note 1) Equivalent sound pressure level at the user handles, max.: 323L 1,50/24,5
  • Husqvarna 323L | Owners Manual - Page 24
    blades Grass blade/grass cutter Trimmer head 325Cx Approved accessories Blade shaft thread 3/8 R Trimmer head Attachments Saw attachment without shaft PA TECHNICAL DATA Type Cutting attachment guard, Art. no. Tricut Ø 300 mm Grass 255-8 1" (Ø 255 8-teeth) Trimmy Fix Superauto II 1" S35 T35
  • Husqvarna 323L | Owners Manual - Page 25
    without charge to the owner if the part is under warranty. EMISSION CONTROL WARRANTY PARTS LIST 1 Carburetor and internal parts 2 Intake pipe, airfilter holder and carburetor bolts. 3 Airfilter and fuelfilter covered up to maintenance schedule. 4 Ignition System 1 Spark Plug, covered up to maintenance
  • Husqvarna 323L | Owners Manual - Page 26
    Super Auto II Super Auto II 1" 1 2 3 4 5 2,4 mm .095" 4,0 m 13' 6 ~2,0 m 6,5 ' 15 cm 6" 7 15 cm 6" 8 9 10
  • Husqvarna 323L | Owners Manual - Page 27
  • Husqvarna 323L | Owners Manual - Page 28
    2,4-2,7 mm .095-.106" S35 1 4 2 5 3 8,5 m 28' 10 cm 4" 4,2 m 14' 6 7 8 "Clic" 10 11 15 cm 6"
  • Husqvarna 323L | Owners Manual - Page 29
    S35 1 3 2 2,4-2,7 mm .095-.106" 4,25 m 14' 4 4,25 m 14' 5 15 cm 6" A B 15 cm 6"
  • Husqvarna 323L | Owners Manual - Page 30
    2,4-2,7 mm .095-.106" T35 1 4 2 5 3 8,5 m 28' 10 cm 4" 4,3 m 14' 6 7 15 cm 6" 8 "Clic" 9 ´´®®zz++HH??ee¶¶55\\¨¨
  • Husqvarna 323L | Owners Manual - Page 31
    Trimmy VII 1 2 5 6 3 7,0 m 23" 4 12 cm 5" ~ 3,5 m 11" 2,0- mm ,080-." 7 8 ~ 15 cm 6" 9 1) 2) 10 11 15 cm 6"
  • Husqvarna 323L | Owners Manual - Page 32
    1140316-95 ´´®®zz++HH??ee¶¶55\\¨¨ 2005-03-07
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
English
323L
325C
X-SERIES
Operator’s manual (EPA I and II)
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.