Husqvarna 323L Owners Manual - Page 11

Fitting other guards and cutting, attachments, Fitting the trimmer guard and, trimmer head, 325Cx

Page 11 highlights

ASSEMBLY Fitting other guards and cutting attachments (323L) Fitting the trimmer guard and trimmer head (325Cx) • Fit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (L). • Fit the guard as shown in the diagram. Tighten securely. • Insert the locking pin into the hole to lock the axle. • Fit the drive disc (B) on the output shaft. • Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing. • Insert the locking pin (C) in the hole to lock the shaft. • Screw on the trimmer head/plastic blades (H) in the opposite direction to the direction of rotation. H H • Screw the trimmer head onto the shaft. • To dismantle, follow the instructions in the reverse order. English - 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

English
– 11
ASSEMBLY
Fitting other guards and cutting
attachments
(323L)
Fit the correct trimmer guard (A) for use with the trimmer
head.
Hook the trimmer guard/combination guard onto the
tting
on the shaft and secure with the bolt (L).
Fit the drive disc (B) on the output shaft.
Turn the blade shaft until one of the holes in the drive disc
aligns with the corresponding hole in the gear housing.
Insert the locking pin (C) in the hole to lock the shaft.
Screw on the trimmer head/plastic blades (H) in the
opposite direction to the direction of rotation.
To dismantle, follow the instructions in the reverse order.
Fitting the trimmer guard and
trimmer head
(325Cx)
Fit the guard as shown in the diagram. Tighten securely.
Insert the locking pin into the hole to lock the axle.
Screw the trimmer head onto the shaft.
H
H