Husqvarna 323R-II Owners Manual - Page 12

ASSEMBLY Fitting the handlebar (323RII) the machine is in a comfortable working position when it hangs from the harness. Tighten the knob. • Remove the screw at the rear of the throttle handle. • Slide the throttle handle onto the right side of the handlebar, (see diagram). Fitting the handlebar (327Rx, 327RDx) • Align the screw hole in the throttle handle with the hole in the handlebar. • Refit the screw in the hole in the rear of the throttle handle. • Screw the screw through the handle and handlebar. Tighten it. • Unscrew the knob from the handlebar mounting. • Position the handlebar as shown. Fit the mounting components and tighten the knob lightly. • Remove the screw at the rear of the throttle handle. • Slide the throttle handle onto the right side of the handlebar, (see diagram). • Align the screw hole in the throttle handle with the hole in the handlebar. • Refit the screw in the hole in the rear of the throttle handle. • Screw the screw through the handle and handlebar. Tighten it. • Unscrew the knob from the handlebar mounting. • Put on the harness and hang the machine from the support hook. Now make a final adjustment so that 12 - English