Husqvarna 325iLK Owner Manual - Page 6
Store Idle Appliances Indoors - When not in use, Maintenance
View all Husqvarna 325iLK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Maintenance on page 15. Do not use a defective product. Do the safety checks, maintenance and service instructions described in this manual. • Faulty cutting attachment can increase the risk of accidents. • Check the gear for dirt and cracks. Clean off grass and leaves from the gear using a brush. Gloves should be worn when necessary. • Always ensure that ventilation openings are kept clear of debris. • Check that the trimmer head is completely attached to the trimmer. • All covers, guards and handles must be fitted before starting. • Check that the product is in perfect working order. Check that all nuts and screws are tight. • Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if it has been exposed to impact or are cracked. Always use the recommended guard for the cutting attachment you are using. See chapter on Technical data. • This product is a dangerous tool if you are not careful or if you use the product incorrectly. This product can cause serious injury or death to the operator or others. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. • Never allow children to use or be in the vicinity of the machine. Since the machine is easy to start, children may be able to start it if they are not kept under full surveillance. This can mean a risk of serious personal injury. Therefore disconnect the battery when the machine is not under close supervision. • Never allow children or other persons not trained in the use of the product and/or the battery to use or service it. • Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons. • The transport guard must always be used for storage and transport. • Keep hands and feet away from the cutting area at all times and especially when switching on the motor. • Keep your hands and feet away from the cutting attachment until it has stopped completely when the product is deactivated. • Do not remove the cut material, or let other persons remove cut material, while the product is activated or the cutting equipment rotates, as this can result in serious injury. • Keep in mind that it is you, the operator that is responsible for not exposing people or their property to accidents or hazards. • Under no circumstances may the design of the product be modified without the permission of the manufacturer. Always use original accessories. Nonauthorized modifications and/or accessories can result in serious personal injury or the death of the operator or others. Your warranty may not cover damage or liability caused by the use of nonauthorized accessories or replacement parts. • The only accessories you can operate with this product are the cutting attachments recommended in the technical data chapter. • Never use a product that has been modified in any way from its original specification • Never use a product that is faulty. Carry out the safety checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the Maintenance heading. • Working in bad weather is tiring and often brings added risk. Due to the added risk, it is not recommended to use the machine in very bad weather, for instance in dense fog, heavy rain, strong winds, intense cold, risk of lightning, etc • Never work from a ladder, stool or any other raised position that is not fully secured. • Store Idle Appliances Indoors - When not in use, appliances should be stored indoors • It is not possible to cover every conceivable situation you can face. Always exercise care and use your common sense. Avoid all situations which you consider to be beyond your capability. If you still feel uncertain about operating procedures after reading these instructions, you should consult an expert before continuing. • Ensure that no people or animals come closer than 15 meters while you work. When several operators are working in the same area the safety distance should be at least 15 metres. Otherwise there is a risk of serious personal injury. Stop the product immediately if anyone approaches. Never swing the product around without first checking behind you to make sure that no one is within the safety zone. • If anything jams in the cutting attachment while you operate the product, stop and deactivate the product. Make sure that the cutting attachment stops completely. Remove the battery before you clean, inspect or repair the product and/or the cutting equipment. • Ensure that people, animals or other things can not affect your control of the product or that they do not come in contact with the cutting attachment or loose objects that are thrown out by the cutting attachment. However, do not use the product unless you are able to call for help in the event of an accident. 6 1385 - 002 - 04.12.2019