Husqvarna 327ES Owners Manual
Husqvarna 327ES Manual
 |
View all Husqvarna 327ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna 327ES manual content summary:
- Husqvarna 327ES | Owners Manual - Page 1
Operator's manual (EPA) 327ES Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English - Husqvarna 327ES | Owners Manual - Page 2
Edgers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator's manual. Please read the operator's manual carefully and make sure you understand the instructions - Husqvarna 327ES | Owners Manual - Page 3
WORKING TECHNIQUES General working instructions 17 Basic working techniques gear 22 Adjusting the edger's cutting depth 23 use of nonauthorized accessories or replacement parts. WARNING! A clearing saw, brushcutter contents of this operator's manual. The Emissions Compliance Period referred - Husqvarna 327ES | Owners Manual - Page 4
, service, maintenance etc) the life span and the second-hand value of the machine can be extended. If you ever lend or sell this machine, make sure that the borrower or buyer gets the operator′s manual, so they will also know how to properly maintain and use it. Thank you for using a Husqvarna - Husqvarna 327ES | Owners Manual - Page 5
26 25 14 Spark plug cap and spark plug 15 Starter handle 16 Air filter cover 17 Fuel tank 18 Locking screw 19 Washers 20 Support flange 21 Blade 22 Drive disc 23 Locking pin 24 Socket spanner 25 Allen key 26 Operator - Husqvarna 327ES | Owners Manual - Page 6
service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions death due to asphyxiation or carbon monoxide poisoning. IMPORTANT! An edger can be a dangerous tool if used incorrectly or carelessly, and - Husqvarna 327ES | Owners Manual - Page 7
section. If your machine fails any of these checks contact your service agent to get it repaired. Throttle lockout The throttle lockout is controlled by two independent return springs.This arrangement means that See instructions under the heading Start. Start the machine and apply full throttle - Husqvarna 327ES | Owners Manual - Page 8
the operator from accidental contact with the cutting attachment. The use of incorrect cutting attachments increases the level of vibration. See instructions under the heading Cutting equipment. The machine′s vibration damping system reduces the transfer of vibration between the engine unit/cutting - Husqvarna 327ES | Owners Manual - Page 9
er. For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine. Never use a machine that has a faulty muffler WARNING! Always stop the engine ! before you work on any part of the cutting equipment. This continues to move even after the - Husqvarna 327ES | Owners Manual - Page 10
Locking screw GENERAL SAFETY PRECAUTIONS The locking screw secures the cutting attachment on the output shaft. Protect your hand from injury when assembling, use the blade guard as protection when tightening with a socket spanner. When fitting, tighten the screw in the opposite direction to the - Husqvarna 327ES | Owners Manual - Page 11
hole behind the blade guard engaging it in the corresponding hole in the drive disc. 3 Fit the blade (B) on the drive disc. 4 Fit the support flange (C). The support flange must be fitted with its outer edge hard up against the blade. 5 Fit the two washers (D) and the locking screw (E). English - 11 - Husqvarna 327ES | Owners Manual - Page 12
ASSEMBLY 6 Tighten the locking screw to a torque of 18-28 Nm (1.8-2.8 kpm). 7 Remove the locking pin. CAUTION! Do not forget to remove the locking pin before using the machine. 12 - English - Husqvarna 327ES | Owners Manual - Page 13
clothes, change your clothes. Wash any part of your body that has come in contact close supervision and when performing all service measures. WARNING! Take care when oil intended for four-stroke engines. • Mixing ratio 1:50 (2%) with HUSQVARNA two-stroke oil. Gasoline, litre 5 10 15 20 US gallon - Husqvarna 327ES | Owners Manual - Page 14
. Always move the machine away from the refuelling area before starting. • Clean the area around the fuel cap. Contamination in the tank can cause operating problems. • Ensure that the fuel is well mixed by shaking the container before filling the tank. 14 - English - Husqvarna 327ES | Owners Manual - Page 15
is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked. • Check that the blade and the blade guard are not damaged or cracked. Replace the blade or blade guard if - Husqvarna 327ES | Owners Manual - Page 16
and do not let go of the starter handle when the cord is fully extended. This can damage the machine. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged - Husqvarna 327ES | Owners Manual - Page 17
instructions Safety instructions before starting work IMPORTANT INFORMATION This section describes the basic safety rules for working with edgers. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service parts. 's manual. - Husqvarna 327ES | Owners Manual - Page 18
Basic safety rules WORKING TECHNIQUES Basic working techniques Safety instructions while working 1 Look around you: • To ensure that people, animals or other things cannot affect your control of the machine. • To ensure that people, animals, - Husqvarna 327ES | Owners Manual - Page 19
serious engine damage. • Be especially careful when pulling the edger towards you during work. • If any foreign object up into the eyes causing blindness or serious injury. Safety instructions after completing work • Make sure the cutting attachment has spare parts for repairs. English - 19 - Husqvarna 327ES | Owners Manual - Page 20
MAINTENANCE Carburetor Your Husqvarna product has been designed and manufactured to specifi ! If the idle speed cannot be ! adjusted so that the cutting attachment stops, contact your dealer/service workshop. Do not use the machine until it has been correctly adjusted or repaired. • The L - Husqvarna 327ES | Owners Manual - Page 21
mixture (too much or incorrect type of oil). • A dirty air filter. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties. English - 21 - Husqvarna 327ES | Owners Manual - Page 22
air filter should be soaked in oil. See instructions under the heading Oiling the air filter. Oiling is fitted with a suppressor. Air filter Always use HUSQVARNA filter oil, art. no. 531 00 92-48. malfunctions • Starting problems • Loss of engine power • Unnecessary wear to engine parts • Excessive fuel - Husqvarna 327ES | Owners Manual - Page 23
MAINTENANCE Adjusting the edger's cutting depth The cutting depth must be adjusted before starting work. • Loosen the wing nut. • Set the desired cutting depth. • Tighten the wing nut. CAUTION! Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your - Husqvarna 327ES | Owners Manual - Page 24
if necessary. Check all cables and connections. Check the clutch, clutch springs and the clutch drum for wear. Replace if necessary by an autorized service workshop. Replace the spark plug. Check that the spark plug is fitted with a suppressor. Check and clean the spark arrestor screen on the muf - Husqvarna 327ES | Owners Manual - Page 25
TECHNICAL DATA Technical data 327ES Engine Cylinder displacement, cu.in/cm3 1,50/24,5 Cylinder bore, inch/mm 1,34/34 Stroke, inch/mm 1,06/27 Idle speed, rpm 2700 Recommended max. - Husqvarna 327ES | Owners Manual - Page 26
off-road engine or a part has failed due to abuse, neglect, or improper maintenance or unapproved modifications. • You are responsible for presenting your small off-road engine to a Husqvarna Forest & Garden distribution center or service center as soon as the problem exists. The warranty repairs - Husqvarna 327ES | Owners Manual - Page 27
husqvarna.com. WHERE TO GET WARRANTY SERVICE Warranty services or repairs are provided through all Husqvarna Forest & Garden authorized servicing dealers. MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS Any replacement part maintenance, as defined in the operator's manual. English - 27 - Husqvarna 327ES | Owners Manual - Page 28
1151421-95 ´´®®zz++SSJJ33¶¶55aa¨¨ 2009-04-24
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
English
327ES
Oper
ator’s manual (EPA)
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.