Husqvarna 327HE4x Owners Manual - Page 10
Assembly - 327he4 parts
View all Husqvarna 327HE4x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ASSEMBLY Fitting the hand guard and loop handle (327HDA65, 327HE3) Fitting the handle (327HE3, 327HE4) 1 Assemble the hand guard and loop handle by screwing them together. Take care to align the holes in both parts. (327HDA65) Fit the handle using two screws. 2 Slide the loop handle and hand guard onto the shaft. (327HDA65) 3 Slide the spacer into the slot in the loop handle. 4 Fit the nut and screw. Do not overtighten. Fitting the cutting head (327HDA65) It is important that the hedge trimmer is laid on a flat surface when you fit the cutting head. Otherwise the cutting head may not be fitted straight. 1 Fit the cutting head to the shaft. CAUTION! Make sure the drive shaft inside the shaft engages with the recess in the cutting head. 2 Tighten the lower screw first, then the upper screw. 5 Now make a final adjustment to give yourself a comfortable working position. Tighten the screw. CAUTION! The loop handle and hand guard must not be fitted behind the arrow marked on the shaft. 10 - English