Husqvarna 327LDx Owners Manual
Husqvarna 327LDx Manual
 |
View all Husqvarna 327LDx manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna 327LDx manual content summary:
- Husqvarna 327LDx | Owners Manual - Page 1
Operator's manual 327LS 327LDX-series Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English - Husqvarna 327LDx | Owners Manual - Page 2
manual. Please read the operator's manual carefully and make sure you understand the instructions attachments, i.e. trimmer heads with trimmer cord. Other symbols/decals on the machine refer to special certification requirements for certain markets. The engine Machines fitted with saw blades or grass - Husqvarna 327LDx | Owners Manual - Page 3
shaft (327LDx 11 Assembling the cutting equipment 12 Fitting the trimmer guard and trimmer head ......... 12 FUEL HANDLING Fuel safety 13 Fuel 13 Fueling 14 STARTING AND STOPPING Check before starting 15 Starting and stopping 15 WORKING TECHNIQUES General working instructions 17 MAINTENANCE - Husqvarna 327LDx | Owners Manual - Page 4
, service, maintenance etc) the life span and the second-hand value of the machine can be extended. If you ever lend or sell this machine, make sure that the borrower or buyer gets the operator′s manual, so they will also know how to properly maintain and use it. Thank you for using a Husqvarna - Husqvarna 327LDx | Owners Manual - Page 5
IS WHAT? 4 5 1 19 4 What is what? 1 Trimmer head 2 Grease filler cap, bevel gear 3 Bevel gear 4 Cutting attachment guard 5 Shaft 6 Shaft coupling (327LDx) 7 Loop handle 8 Throttle control 9 Stop switch 10 Throttle lockout 19 Drive disc 20 Operator's manual 21 Allen key 22 Locking pin English - 5 - Husqvarna 327LDx | Owners Manual - Page 6
operate with this engine unit are the cutting attachments we recommend in service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading A clearing saw, brushcutter or trimmer can be - Husqvarna 327LDx | Owners Manual - Page 7
machine fails any of these checks contact your service agent to get it repaired. Throttle lockout instructions under the heading Start. Start the machine and apply full throttle. Release the throttle and check that the cutting attachment stops and remains at a standstill. If the cutting attachment - Husqvarna 327LDx | Owners Manual - Page 8
or an incorrect cutting attachment increases the level of vibration. See instructions under the heading Cutting equipment. The machine′s vibration damping system reduces the transfer of vibration between the engine unit/cutting equipment and the machine′s handle unit. Start the engine and make sure - Husqvarna 327LDx | Owners Manual - Page 9
be cleaned regularly. A blocked screen will cause the engine to overheat and may lead to serious damage. IMPORTANT! Only use cutting attachments with the guards we recommend! See the chapter on Technical data. Refer to the instructions for the cutting attachment to check the correct way to load the - Husqvarna 327LDx | Owners Manual - Page 10
vibration. • Only use the recommended trimmer heads and trimmer cords. These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical - Husqvarna 327LDx | Owners Manual - Page 11
loop handle ASSEMBLY • Before using the unit, tighten the knob securely. • Clip trimmer to give a comfortable working position. Tighten the bolt/knob. Assembling and dismantling the two-piece shaft (327LDx) • Push and hold the button (C). While securely holding the engine end, pull the attachment - Husqvarna 327LDx | Owners Manual - Page 12
, follow the instructions in the reverse order. WARNING! Never use a cutting ! attachment without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury. Fitting the trimmer guard and trimmer head • Fit the - Husqvarna 327LDx | Owners Manual - Page 13
any part of complete service is carried out before long-term storage. • The transport guard must always be fitted to the cutting attachment HUSQVARNA two-stroke engine oil, which is specially formulated for our air-cooled two stroke-engines. • Never use two-stroke oil intended for water-cooled engines - Husqvarna 327LDx | Owners Manual - Page 14
not smoke or place hot objects near fuel. Always shut off the engine before refuelling. Always stop the engine and let it cool for a few minutes before refuelling. When fuel cap. Contamination in the tank can cause operating problems. • Ensure that the fuel is well mixed by shaking the container before fi - Husqvarna 327LDx | Owners Manual - Page 15
trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked. WARNING! The complete the engine is started ! with the choke in either the choke or start throttle positions the cutting attachment will start - Husqvarna 327LDx | Owners Manual - Page 16
fully extended. This can damage the machine. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the Do not use a machine with damaged spark plug cap. Stopping Stop the engine by switching off the ignition. CAUTION! The stop switch automatically returns to the - Husqvarna 327LDx | Owners Manual - Page 17
WORKING TECHNIQUES General working instructions IMPORTANT! This section takes up the basic safety precautions for working with a trimmer. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service workshop. Avoid all usage which - Husqvarna 327LDx | Owners Manual - Page 18
attachment. Always stop the engine before cleaning. Cutting • The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower. Keep the cord parallel to the ground when cutting. Avoid pressing the trimmer head can easily remove grass and weeds up against walls, fences, - Husqvarna 327LDx | Owners Manual - Page 19
Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After the engine has used 8-10 tanks of fuel the engine speed cannot be ! adjusted so that the cutting attachment stops, contact your dealer/service workshop. Do not use the machine until it has - Husqvarna 327LDx | Owners Manual - Page 20
mixture (too much or incorrect type of oil). • A dirty air filter. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties. 20 - English - Husqvarna 327LDx | Owners Manual - Page 21
. See instructions under the heading Oiling the air filter. Oiling the air filter Air filter The air filter must be regularly cleaned to remove dust and dirt in order to avoid: • Carburettor malfunctions • Starting problems • Loss of engine power • Unnecessary wear to engine parts Always use HUSQVARNA - Husqvarna 327LDx | Owners Manual - Page 22
that the bevel gear is filled three-quarters full with grease. Use HUSQVARNA special grease. The grease in the bevel gear does not normally need to out. CAUTION! Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator - Husqvarna 327LDx | Owners Manual - Page 23
trimmer head is undamaged and not cracked. Replace the trimmer head if necessary. X Check that nuts and screws are tight. X Check that there are no fuel leaks from the engine clutch drum for wear. Replace if necessary by an autorized service workshop. Replace the spark plug. Check that the spark - Husqvarna 327LDx | Owners Manual - Page 24
1,06/0,5 Weight Weight without fuel, cutting attachment and guard, Lbs/kg 11,2/5,1 Sound levels (see note 1) Equivalent sound pressure level at the operator's ear, measured according to EN ISO 11806 and ISO 22868, dB(A): Equipped with trimmer head (original) 94 Vibration levels (see note - Husqvarna 327LDx | Owners Manual - Page 25
fied power heads and have been evaluated to applicable ISO- and EN safety requirement standards by the Swedish Machinery Testing Institute. Powerhead model 327LDx Accessories Cultivator attachment CAC Edger attachment EAC Pole saw attachment PAC Blower attachment BAC Hedge trimmer attachment HAC - Husqvarna 327LDx | Owners Manual - Page 26
a part has failed due to abuse, neglect, or improper maintenance or unapproved modifications. • You are responsible for presenting your small off-road engine to a Husqvarna Forest & Garden distribution center or service center as soon as the problem exists. The warranty repairs should be completed in - Husqvarna 327LDx | Owners Manual - Page 27
PARTS LIST 1 Carburetor and internal parts husqvarna.com. WHERE TO GET WARRANTY SERVICE Warranty services or repairs are provided through all Husqvarna Forest & Garden authorized servicing dealers. MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS Any replacement part manual. English - 27 - Husqvarna 327LDx | Owners Manual - Page 28
- Husqvarna 327LDx | Owners Manual - Page 29
2,4-2,7 mm .095-.106" S35 1 4 2 5 3 8,5 m 28' 10 cm 4" 4,2 m 14' 6 7 8 "Clic" 10 11 15 cm 6" - Husqvarna 327LDx | Owners Manual - Page 30
S35 1 3 2 2,4-2,7 mm .095-.106" 4,25 m 14' 4 4,25 m 14' 5 15 cm 6" A B 15 cm 6" - Husqvarna 327LDx | Owners Manual - Page 31
2,4-2,7 mm .095-.106" T35, T35x 1 2 4 5 3 8,5 m 28' 10 cm 4" 4,3 m 14' 6 7 15 cm 6" 9 8 "Clic" - Husqvarna 327LDx | Owners Manual - Page 32
2,0-2,4 mm .079-.095" T25 1 4 2 5 3 6,0 m 18' 10 cm 4" 3,05 m 9' 6 7 15 cm 6" 9 8 "Clic" - Husqvarna 327LDx | Owners Manual - Page 33
- Husqvarna 327LDx | Owners Manual - Page 34
- Husqvarna 327LDx | Owners Manual - Page 35
- Husqvarna 327LDx | Owners Manual - Page 36
Original instructions 1153293-95 ´´®®zz++UU==GG¶¶5599¨¨ 2010-03-03
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
English
327LS
327LD
X-series
Oper
ator’s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.