Husqvarna 327LDx Owners Manual - Page 11
Assembly
View all Husqvarna 327LDx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Fitting the loop handle ASSEMBLY • Before using the unit, tighten the knob securely. • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. Dismantling: • Loosen the coupling by turning the knob (at least 3 times). • Slide the spacer into the slot in the loop handle. Fit the nut, knob and screw. Do not overtighten. • Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob. Assembling and dismantling the two-piece shaft (327LDx) • Push and hold the button (C). While securely holding the engine end, pull the attachment straight out of the coupling. C Assembly: • Loosen the coupling by turning the knob. • Align the tab of the attachment (A) with the arrow on the coupling (B). B A • Push the attachment into the coupling until the attachment snaps into place. English - 11