Husqvarna 327P4 Owners Manual - Page 17
Assembly of the saw attachment
View all Husqvarna 327P4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ASSEMBLY of 4 Nm. After the machine has been in use for around 20 hours, re-tighten the screws to 4 Nm. • Before using the unit, tighten the knob securely. Dismantling • Loosen the coupling by turning the knob (at least 3 times). Assembly of the saw attachment (327P5) Assembly • Loosen the coupling by turning the knob. • Align the tab of the attachment (A) with the arrow on the coupling (B). B A • Push and hold the button (C). While securely holding the engine end, pull the attachment straight out of the coupling. • Push the attachment into the coupling until the attachment snaps into place. English - 17
ASSEMBLY
English
–
17
of 4 Nm. After the machine has been in use for around 20
hours, re-tighten the screws to 4 Nm.
Assembly of the saw attachment
(327P5)
Assembly
•
Loosen the coupling by turning the knob.
•
Align the tab of the attachment (A) with the arrow on
the coupling (B).
•
Push the attachment into the coupling until the
attachment snaps into place.
•
Before using the unit, tighten the knob securely.
Dismantling
•
Loosen the coupling by turning the knob (at least 3
times).
•
Push and hold the button (C). While securely holding
the engine end, pull the attachment straight out of the
coupling.
A
B