Husqvarna 327P5x Owners Manual - Page 16
Filling with oil, Assembling and dismantling the, two-piece shaft, Fitting the impact guard - & coupling
View all Husqvarna 327P5x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Filling with oil ASSEMBLY • Before using the unit, tighten the knob securely. • Open the cap on top of the bar head Dismantling: Loosen the coupling by turning the knob (at least 3 times). • Fill with Husqvarna saw chain oil. • Refit the cap. Assembling and dismantling the two-piece shaft (327P5) • Push and hold the button (C). While securely holding the engine end, pull the attachment straight out of the coupling. Assembly: • Loosen the coupling by turning the knob. • Align the tab of the attachment (A) with the arrow on the coupling (B). B A • Push the attachment into the coupling until the attachment snaps into place. C Fitting the impact guard (327P5) If the machine has a protective guard bolted under the engine this should be removed before the impact guard is assembled. Fit the guard using the three screws and washers. Fit the two short screws in hole A. Tighten the screws to a torque 16 - English