Husqvarna 353 E-TECH Owners Manual - Page 40

TECHNICAL DATA Bar and chain combinations Low kickback saw chain is a chain which has only met the kickback performance requirements of ANSI B 175.1 safety requirements for gasoline powered chain saws when tested on the representative sample of chain saws below 3.8 cu. in. specified in ANSI 175.1. We recommend that you as a replacement use the listed chains or "Low kickback saw chains" which are available at your dealer. Length, inch 13 15 16 18 20 13 15 16 18 20 Pitch, inch 0,325 0,325 0,325 0,325 0,325 0,325 0,325 0,325 0,325 0,325 Bar Gauge, inch 1,3 1,5 Max. nose radius 10T 10T 10T 10T 10T 10T 10T 10T 10T 12T Chain Type Drive link count 56 64 Husqvarna H30 66 72 78 56 64 Husqvarna H25 66 72 78 Note: For the chains above you are free to choose between 0,050" and 0,058" gauge drive link for the corresponding bar, see the table below. 0,050"/1,3 mm 0,058"/1,5 mm H30 H22 - H25 Saw chain filing and file gauges 40 - English