Husqvarna 356BT Owners Manual - Page 3

Symbols - glove

Page 3 highlights

KEY TO SYMBOLS Symbols WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance. Always wear protective gloves. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Regular cleaning is required. Always wear: • Hearing protection • Approved eye protection Visual check. Protective goggles or a visor must be worn. Gloves should be worn when necessary. The blower can forcibly throw objects that can bounce back. This can result in serious eye injuries if the recommended safety equipment is not used. The blower operator must make sure that no bystanders or animals come nearer than 15 metres. Whenever several operators are working in the same work area, they should maintain a safe distance of at least 15 metres from one another. A breathing mask should be used when there is a risk of dust. Other symbols/decals on the machine refer to special certification requirements for certain markets. English - 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

English
3
KEY
T
O SYMBOLS
Symbols
W
ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others.
Please read the oper
ator’s manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
Hearing protection
Approved eye protection
Glo
ves should be worn when necessary.
The blower can forcibly throw objects
that can bounce back. This can result in
serious eye injuries if the recommended
safety equipment is not used.
The blower operator must make
sure that no bystanders or animals
come nearer than 15 metres.
Whenever several operators are
working in the same work area, they should maintain a safe
distance of at least 15 metres from one another.
A breathing mask should be used when
there is a risk of dust.
Other symbols/decals on the mac
hine refer to special
certification requirements for certain markets.
Switch off the engine by moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Alw
ays wear protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.