Husqvarna 372 XP Owners Manual - Page 40
Saw chain filing and file gauges
View all Husqvarna 372 XP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
TECHNICAL DATA Recommended original and replacement bar and chain combinations These Husqvarna chain saw models are in the ANSI category of saws above 3,8 cu. in. and are not required to comply with low kickback performance requirements. However, for these models we recommend the following cutting equipment. Length, inch Pitch, inch 15 3/8 16 3/8 18 3/8 20 3/8 24 3/8 28 3/8 Bar Gauge, inch 0,058 0,058 0,058 0,058 0,058 0,058 Max. nose radius 11T 11T 11T 11T 11T 11T Chain Type Drive link count Husqvarna H42, Husqvarna H48 56 Husqvarna H42, Husqvarna H48 60 Husqvarna H42, Husqvarna H48 68 Husqvarna H42, Husqvarna H48 72 Husqvarna H42, Husqvarna H48 84 Husqvarna H42, Husqvarna H48 93 Note: For the chains above you are free to choose between 0,050" and 0,058" gauge drive link for the corresponding bar, see the table below. 0,050"/1,3 mm H46 H47 0,058"/1,5 mm H42 H48 WARNING! This chain saw model is capable of severe kickback that could result in serious ! injuries to the user. Do not operate this saw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Saws with significantly reduced kickback potential are available. Always use the safest saw and cutting equipment applicable to your cutting need. Saw chain filing and file gauges 40 - English