Husqvarna 395 XP Owners Manual - Page 34

Chain catcher MAINTENANCE Stop switch Check that the chain catcher is not damaged and is firmly attached to the body of the chain saw. Start the engine and make sure the engine stops when you move the stop switch to the stop setting. Right hand guard Muffler Check that the right hand guard is not damaged and that there are no visible defects, such as cracks. The muffler is designed to reduce the noise level and to direct the exhaust gases away from the operator. The exhaust gases are hot and can contain sparks, which may cause fire if directed against dry and combustible material. Vibration damping system Regularly check the vibration damping units for cracks or deformation. Make sure the vibration damping units are securely attached to the engine unit and handle unit. Some mufflers are equipped with a special spark arrestor mesh. If your machine has this type of muffler, you should clean the mesh at least once a week. This is best done with a wire brush. A blocked mesh will cause the engine to overheat and may lead to serious damage. Note! The mesh must be replaced if it is damaged. If the mesh is blocked the machine will overheat and this will cause damage to the cylinder and piston. Never use a machine with a muffler that is in poor condition. Never use a muffler if the spark arrestor mesh is missing or defective. 34 - English