Home » Husqvarna Manuals » Lawn & Garden » Husqvarna 440 » Manual Viewer

Husqvarna 440 Operation Manual - Page 40

Bar and chain combinations, Saw chain filing and file gauges, Chain, Length, inch, Pitch, Gauge, mm - 18 inch

Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

TECHNICAL DATA Bar and chain combinations The following combinations are CE approved. Bar Length, inch Pitch, inch Gauge, mm Max. nose radius 13 0,325 10T 15 0,325 10T 1,3 16 0,325 10T 18 0,325 10T Type Husqvarna H30 Chain Length, drive links (no.) 56 64 66 72 Saw chain ﬁling and ﬁle gauges 40 - English 115 10 82-26 Rev.2 2008-06-03

Section	Page
Symbols on the machine:	2
Symbols in the operator’s manual:	2
Contents	3
Dear Customer,	4
Before using a new chain saw	6
Important	6
Always use common sense	7
Personal protective equipment	7
Machine¢s safety equipment	7
Chain brake and front hand guard	7
Will my hand always activate the chain brake during a kickback?	9
Will my inetria activated chain brake always activate during kickback in the event of a kickback?	9
Will my chain brake always protect me from injury in the event of a kickback?	9
Throttle lockout	9
Chain catcher	9
Right hand guard	10
Vibration damping system	10
Stop switch	10
Muffler	10
Cutting equipment	11
General rules	11
Cutting equipment designed to reduce kickback	11
Sharpening your chain and adjusting depth gauge setting	12
Tensioning the chain	13
Lubricating cutting equipment	15
Fitting the bar and chain	17
435	17
435e, 440e	17
Fitting a spike bumper	18
Fuel	19
Petrol	19
Two-stroke oil	19
Mixing	19
Chain oil	19
Fuelling	20
Fuel safety	20
Transport and storage	20
Long-term storage	20
Starting and stopping	21
Starting	21
Stopping	22
Before use:	23
General working instructions	23
Basic safety rules	23
General rules	24
Basic cutting technique	25
Tree felling technique	26
Freeing a tree that has fallen badly	29
How to avoid kickback	30
What is kickback?	30
General	31
Carburettor adjustment	31
Function	31
Basic settings and running in	31
Fine adjustment of the idle speed T	31
Correctly adjusted carburettor	31
Checking, maintaining and servicing chain saw safety equipment	31
Chain brake and front hand guard	31
Throttle lockout	32
Chain catcher	32
Right hand guard	33
Vibration damping system	33
Stop switch	33
Muffler	33
Starter	34
Replacing the starter cord	34
Tensioning the recoil spring	34
Replacing the return and drive springs	35
Fitting the starter	35
Air filter	35
Spark plug	36
Lubricating the bar tip sprocket	36
Needle bearing lubrication	36
Cooling system	36
”Air Injection” centrifugal cleaning	37
Winter use	37
Temperature -5°C or colder:	37
Maintenance schedule	38
Technical data	39
Bar and chain combinations	40
Saw chain filing and file gauges	40
EC-declaration of conformity	41