Husqvarna 450 e-series Owners Manual - Page 30
use the kickback zone of the guide bar., accidents occur during limbing. Do
View all Husqvarna 450 e-series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
WORKING TECHNIQUES was being used when the kickback zone of the bar touched the object. Cutting the trunk into logs See instructions under the heading Basic cutting technique. Kickback only occurs if the kickback zone of the bar touches an object. Limbing WARNING! A majority of kickback ! accidents occur during limbing. Do not use the kickback zone of the guide bar. Be extremely cautious and avoid contacting the log, other limbs or objects with the nose of the guide bar. Be extremely cautious of limbs under tension. They can spring back toward you and cause loss of control resulting in injury. Make sure that you can stand and move about safely. Work on the left side of the trunk. Work as close as possible to the chain saw for maximum control. If possible, let the weight of the chain saw rest on the trunk. Keep the trunk between you and the chain saw as you move along the trunk. 30 - English 1151081-49 Rev.2 2008-02-27