Husqvarna 520iHE3 Owner Manual - Page 15

Troubleshooting - problems

Get Husqvarna 520iHE3 PDF manuals and user guides View all Husqvarna 520iHE3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

To clean and lubricate the cutter blade 1. Use a cleaning agent to clean resin and remaining plant particles from the blades. 2. Make sure that the blade bars are not damaged. Make sure that the blade bars have no deformation. Remove burrs with a file. 3. Make sure that the blades move freely. 4. Lubricate the blade bars before long periods of storage. To adjust the tilt tension of the cutting deck 1. Turn the screw to adjust the tilt tension. 2. Turn the screw clockwise or counterclockwise to easily tilt the cutting deck. Troubleshooting Keypad Problem Possible faults Possible solution Green start LED flashes. Low battery voltage. Charge the battery. Red error LED flash- Overload. es. The cutting attachment is blocked. stop the product. Remove the battery. Clean the cutting attachment from unwanted materials. Loosen the chain. Temperature deviation. Let the product become cool. The power trigger and the start button are pushed at the same time. Release the power trigger and push the start button. The product does not Dirt in the battery connectors. start. Clean the battery connectors with compressed air or a soft brush. Red error LED comes on. It is necessary to do servicing on the product. Speak to your servicing dealer. Battery Problem Green LED flashes. Possible faults Low battery voltage. Possible solution Charge the battery. 31 - 004 - 19.08.2020 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
To clean and lubricate the cutter blade
1.
Use a cleaning agent to clean resin and remaining
plant particles from the blades.
2.
Make sure that the blade bars are not damaged.
Make sure that the blade bars have no deformation.
Remove burrs with a file.
3.
Make sure that the blades move freely.
4.
Lubricate the blade bars before long periods of
storage.
To adjust the tilt tension of the cutting
deck
1.
Turn the screw to adjust the tilt tension.
2.
Turn the screw clockwise or counterclockwise to
easily tilt the cutting deck.
Troubleshooting
Keypad
Problem
Possible faults
Possible solution
Green start LED
flashes.
Low battery voltage.
Charge the battery.
Red error LED flash-
es.
Overload.
The cutting attachment is blocked. stop the
product. Remove the battery. Clean the cut-
ting attachment from unwanted materials.
Loosen the chain.
Temperature deviation.
Let the product become cool.
The power trigger and the start button are
pushed at the same time.
Release the power trigger and push the start
button.
The product does not
start.
Dirt in the battery connectors.
Clean the battery connectors with com-
pressed air or a soft brush.
Red error LED
comes on.
It is necessary to do servicing on the product.
Speak to your servicing dealer.
Battery
Problem
Possible faults
Possible solution
Green LED flashes.
Low battery voltage.
Charge the battery.
31 - 004 - 19.08.2020
15