Husqvarna 525L Owners Manual - Page 22

TECHNICAL DATA Technical data Engine Cylinder displacement, cu.in/cm3 Cylinder bore, inch/mm Stroke, inch/mm Idle speed, rpm Recommended max. speed, rpm Speed of output shaft, rpm Max. engine output, acc. to ISO 8893, kW/ rpm Catalytic converter muffler Speed-regulated ignition system Emissions Durability Period according to California Air Resources Board, h. Ignition system Manufacturer/type of ignition system Spark plug Electrode gap, inch/mm Fuel and lubrication system Manufacturer/type of carburetor Fuel tank capacity, US pint/litre Weight Weight without fuel, cutting attachment and guard, Lbs/kg Sound levels (see note 1) Equivalent sound pressure level at the operator's ear, measured according to ISO 22868, dB(A): Vibration levels (see note 2) Equivalent vibration levels (ahv,eq) at handles, measured according to ISO 22867, m/s2 Equipped with trimmer head (original), left/right 525L 1,55/25,4 1,34/34 1.10/28.0 3000 9500±500 6500 0,9/8500 Yes Yes 300 525LS 1,55/25,4 1,34/34,0 1.10/28.0 3000 9500±500 6500 1.0/8500 Yes Yes 300 525LST 1,55/25,4 1,34/34,0 1.10/28.0 3000 10500±500 5500 1.0/8500 Yes Yes 300 IKEDA/UK NGK BPMR8Y 0.026/0.65 IKEDA/UK NGK BPMR8Y 0.026/0.65 IKEDA/UK NGK BPMR8Y 0.026/0.65 walbro WTEA-8C walbro WTEA-8C walbro WTEA-8C 1.08/0.51 1.08/0.51 1.08/0.51 9.7/4.4 10.1/4.6 10.1/4.6 98 98 98 2.1/1.9 3.0/2.8 3.7/2.1 NOTE! This spark ignition system complies with the Canadian ICES-002 standard. Note 1 Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard deviation) of 1 dB (A). Note 2: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s2. 525L, 525LS, 525LST Approved accessories Arbor shaft thread M10 Plastic blades Trimmer head Type Tricut Ø 300 mm Alloy Superauto II 1" T25 T35, T35x Cutting attachment guard, Art. no. 503 93 42-02 503 93 42-02 / 503 97 71-01 503 93 42-02 / 503 97 71-01 503 93 42-02 / 503 97 71-01 503 93 42-02 / 503 97 71-01 The accessories are recommended for use in combination with the specified power heads and have been evaluated to applicable ISO- and EN safety requirement standards by the Swedish Machinery Testing Institute. 22 - English 1156806-49 Rev. 1 2014-04-22