Husqvarna 525LK Operation Manual - Page 2

KEY TO SYMBOLS Symbols WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator's manual. Only use non-metallic, flexible cutting attachments, i.e. trimmer heads with trimmer cord. Air purge Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Always wear: • A protective helmet where there is a risk of falling objects • Approved hearing protection • Approved eye protection Max. speed of output shaft, rpm 10000 This product is in accordance with applicable EC directives. Watch out for thrown objects and ricochets. Noise emission to the environment according to the European Community's Directive. The machine's emission is specified in the Technical data chapter and on the label. Other symbols/decals on the machine refer to special certification requirements for certain markets. The engine is switched off by moving the stop switch to the stop position. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. The operator of the machine must ensure, while working, that no persons or animals come closer than 15 meters. 15 m 50FT 15 m 50FT Always wear approved protective gloves. Regular cleaning is required. Arrows which show limits for handle positioning. Always wear approved protective gloves. Visual check. Wear sturdy, non-slip boots. 2 - English