Husqvarna 536LiPT5 Operation Manual - Page 29

TECHNICAL DATA Guide bar and saw chain combinations The following cutting attachments are approved for the models Husqvarna 536LiP4 and 536LiPT5. The A318 bar is used on the 536LiP4 and 536LiPT5 only. The following combinations are CE approved. Guide bar Length, inch Pitch, inch Gauge, mm 10 1/4 1,3 12 1/4 1,3 Saw chain Type Husqvarna H00 Husqvarna H00 Length, drive links (no.) 58 64 Saw chain filing and file gauges EC Declaration of Conformity (Applies to Europe only) Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500 declares that the battery-operated chain clearing saw Husqvarna 536LiP4 and 536LiPT5 with serial numbers dating 2016 and onwards (the year is clearly stated on the rating plate, followed by the serial number) comply with the requirements of the COUNCIL'S DIRECTIVE: - of May 17, 2006 "relating to machinery" 2006/42/EC. - of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU. The following standards have been applied: EN 60745-1, EN 60335-1, EN ISO 11680-1:2011, EN 60335-2-29, EN 62133:2011 SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. Intertek Semko AB, Box 1103, SE-164 22 Kista, Sweden has issued a voluntary type approval for Husqvarna AB. Huskvarna January 1, 2016 Lars Roos, Development manager (Authorized representative for Husqvarna AB and responsible for technical documentation.) English - 29