Husqvarna 562 XP GW Owners Manual - Page 2

KEY TO SYMBOLS Symbols on the machine: WARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Always wear: • Approved protective helmet • Approved hearing protection • Protective goggles or a visor Both of the operator′s hands must be used to operate the chain saw. Never operate a chain saw holding it with one hand only. Never let the guide bar tip come in contact with any object. WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury. Chain brake, activated (right) Chain brake, not activated (left) Decompression valve: The valve is to reduce the pressure in the cylinder and make starting easier. You should always use the decompression valve when starting the machine. Ignition; choke: Set the choke control in the choke position. This should automatically set the stop switch to the start position. Adjustment of the oil pump If your machine bears this symbol it is equipped with heated handles. Recommended cutting equipment in this example: Bar length 18 inches - Max tooth count for the bar nose sprocket is 11T - Chain type Husqvarna H42 Other approved bar and chain combinations in Operator's Manual. Measured maximum kickback value with brake for the bar and chain combination on the label. Measured maximum kickback value without triggering the brake, for the bar and chain combination on the label. Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder. Check that the spark plug is fitted with a suppressor. Other symbols/decals on the machine refer to special certification requirements for certain markets. Air purge 2 - English