Husqvarna 576 XP AutoTune Owners Manual - Page 13
Sharpening your chain and adjusting, depth gauge setting
View all Husqvarna 576 XP AutoTune manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
GENERAL SAFETY PRECAUTIONS Chain • Chain pitch (inches) 2 Cutting angle • Drive link width (mm/inches) 3 File position 4 Round file diameter • Number of drive links. It is very difficult to sharpen a chain correctly without the right equipment. We recommend that you use our file gauge. This will help you obtain the maximum kickback reduction and cutting performance from your chain. Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teeth • Never use a blunt chain. When the chain is blunt you have to exert more pressure to force the bar through the wood and the chips will be very small. If the chain is very blunt it will produce wood powder and no chips or shavings. • A sharp chain eats its way through the wood and produces long, thick chips or shavings. See instructions under the heading Technical data for information about sharpening your chain. WARNING! Departure from the ! sharpening instructions considerably increases the risk of kickback. Sharpening cutting teeth • The cutting part of the chain is called the cutter and consists of a cutting tooth (A) and the depth gauge (B). The cutters cutting depth is determined by the difference in height between the two (depth gauge setting). To sharpen cutting teeth you will need a round file and a file gauge. See instructions under the heading Technical data for information on the size of file and gauge that are recommended for the chain fitted to your chain saw. When you sharpen a cutting tooth there are four important factors to remember. 1 Filing angle • Check that the chain is correctly tensioned. A slack chain will move sideways, making it more difficult to sharpen correctly. • Always file cutting teeth from the inside face. Reduce the pressure on the return stroke. File all the teeth on English - 13