Husqvarna 580BFS Owners Manual - Page 15

ASSEMBLY Assembling the blow pipe and control handle • Connect the blower and control pipe with the flexible hose. Clamp both ends of the flexible hose in place. Use the accompanying hardware. Accessories Handlebar Disassemble the intermediate pipe. Disassemble the knob from the holder and puch the holder on to the holder pipe. Assemble the knob and tighten. 3 1 4 2 1 Flexible hose 2 Control pipe 3 Clamp 4 Clamp NOTE! Lubricate the pipes a little to facilitate assembly. • Fasten the handle holder to the control pipe and tighten the knob on the holder. Please make sure to align the handle holder with the convex of the control pipe. Assemble the intermediate pipe. • If higher air speed is required, the round blow pipe is replaced by the flat nozzle. • Adjust the position and angle to achieve a comfortable working position, and tighten. • Use the clamp to fasten the cabling to the flexible hose. (BTS) • Connect the straight pipe and pipe end. Push the pipes together and turn them so they lock. 1154432-49 Rev. 1 2011-06-28 English - 15