Husqvarna CRT900L Owners Manual - Page 6

Remove Tiller From Crate, Connect Shift Rod See Fig. 6, Check Tire Pressure, Handle Height

Page 6 highlights

ASSEMBLY CONNECT SHIFT ROD (See Fig. 6) • Insert end of shift rod into hole of shift lever indicator. • Insert hairpin clip through hole of shift rod to secure. SHIFT ROD HAIRPIN CLIP SHIFT LEVER INDICATOR Fig. 6 REMOVE TILLER FROM CRATE • Make sure shift lever indicator is in "N" position (See Fig. 6) • Tilt tiller forward by lifting handle. Separate cardboard cover from leveling shield. • Rotate tiller handle to the right and pull tiller out of carton. CHECK TIRE PRESSURE The tires on your unit were overinflated at the factory for shipping purposes. Correct and equal tire pressure is important for best tilling performance. • Reduce tire pressure to 20 PSI (1.4 kg/cm2). HANDLE HEIGHT • Handle height may be adjusted to better suit operator. (See "TO ADJUST HANDLE HEIGHT" in the Service and Adjustments section of this manual). 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23

6
ASSEMBLY
SHIFT
ROD
HAIRPIN
CLIP
SHIFT
LEVER
INDICATOR
REMOVE TILLER FROM CRATE
Make sure shift lever indicator is in “N” position (See
Fig. 6)
Tilt tiller forward by lifting handle.
Separate cardboard
cover from leveling shield.
Rotate tiller handle to the right and pull tiller out of
carton.
CONNECT SHIFT ROD (See Fig. 6)
Insert end of shift rod into hole of shift lever indicator.
Insert hairpin clip through hole of shift rod to secure.
Fig. 6
CHECK TIRE PRESSURE
The tires on your unit were overinflated at the factory for
shipping purposes.
Correct and equal tire pressure is
important for best
tilling performance.
Reduce tire pressure to 20 PSI (1.4 kg/cm
2
).
HANDLE HEIGHT
Handle height may be adjusted to better suit operator.
(See “TO ADJUST HANDLE HEIGHT”
in the Service
and Adjustments section of this manual).