Husqvarna HU675AWD Owners Manual - Page 14

Service And Adjustments - carburetor

Get Husqvarna HU675AWD PDF manuals and user guides View all Husqvarna HU675AWD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

SERVICE AND ADJUSTMENTS CAUTION: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug. LAWN MOWER TO ADJUST CUTTING HEIGHT See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual. REAR DEFLECTOR The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. If the deflector becomes damaged, it should be replaced. TO REMOVE DRIVE BELT (See Figs. 18 & 19) 1. Turn lawn mower on its side with air filter and carburetor up. 2. Remove blade bolt, lockwasher, hardened washer and blade. 3. Remove debris shield. 4. Remove rear baffle. 5. Disconnect return spring from rear baffle / rear gearcase belt keeper. 6. Disconnect cable from rear gearcase. 7. Remove drive cover. DRIVE COVER REAR BAFFLE DEBRIS SHIELD BLADE HARDENED WASHER LOCKWASHER BLADE BOLT FIG. 18 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
14
LAWN MOWER
TO ADJUST CUTTING HEIGHT
See “TO ADJUST CUTTING HEIGHT” in the Operation
section of this manual.
REAR DEFLECTOR
The rear deflector, attached between the rear wheels of
your mower, is provided to minimize the possibility that
objects will be thrown out of the rear of the mower into
the operator's mowing position.
If the deflector becomes
damaged, it should be replaced.
CAUTION:
TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
1.
Release control bar and stop engine.
2.
Make sure the blade and all moving parts have completely stopped.
3.
Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.
SERVICE AND ADJUSTMENTS
TO REMOVE DRIVE BELT (See Figs. 18 & 19)
1.
Turn lawn mower on its side with air filter and carbure-
tor up.
2.
Remove blade bolt, lockwasher, hardened washer and
blade.
3. Remove debris shield.
4. Remove rear baffle.
5.
Disconnect return spring from rear baffle / rear gearcase
belt keeper.
6.
Disconnect cable from rear gearcase.
7. Remove drive cover.
DRIVE
COVER
BLADE BOLT
HARDENED WASHER
LOCKWASHER
BLADE
DEBRIS
SHIELD
REAR
BAFFLE
FIG. 18