Husqvarna LC221AH Operation Manual - Page 12
Cutting height, Filling with oil - lowes
View all Husqvarna LC221AH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ASSEMBLING AND ADJUSTMENTS Mulching 1 Lift the back shield and remove the grass bag (if equipped). 2 Insert the mulch plug into the collector channel. 3 Close the back shield to allow the machine to discharge material to the left of the machine while cutting. 3 Allow the back shield to close and ensure the back shield is firmly shut against the mulch plug. Rear-side discharging 1 Lift the back shield and remove the mulch plug or grass bag (if equipped). Cutting height The cutting height can be adjusted to 9 (1-9) different positions. Raise wheels for low cut and lower wheels for high cut. Adjust cutting height to suit your requirements. Medium position is best for most lawns. • To change cutting height, squeeze height adjuster lever toward the wheel. Move the wheel up or down to suit your requirements. Set the same height at all four corners. 2 Install the discharge chute. • The adjuster lever is spring loaded. 12 - English Filling with oil • The oil tank is empty at delivery. Fill the oil slowly with the included oil. See instructions under the heading Maintenance.