Husqvarna LC221FH Owner Manual - Page 11
Grass catcher, Starter handle, Convert the lawn mower
View all Husqvarna LC221FH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ASSEMBLING AND ADJUSTMENTS Grass catcher Assembly of the catcher 1 Put the grass catcher frame into the grass bag with the rigid part of the bag on the bottom. Make sure the handle of the frame is outside of the top of the bag. Convert the lawn mower Your lawn mower was shipped ready to be used in mulching mode. The mulching mode will recut the grass clippings many times, which will reduce the clippings in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. In addition, the mulched grass will biodegrade quickly to provide nutrients for the lawn. Use rear bagging to collect the grass clippings within the grass catcher. WARNING! Do not run your lawn mower ! without rear door closed or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open. 2 Secure the grass bag to the frame by using the quick-action clips. Rear bagging 1 Lift the back shield and remove the mulch plug. Starter handle Install starter handle 1 Loosen the T-knob. 2 Lift the back shield and place the grass catcher frame hooks onto the grass bag brackets. 2 Hold the operator presence control bar against the upper handle. 3 Release the back shield and allow it to rest on top of the grass bag frame. 3 Grip the starter handle, slowly pull the engine starter handle until the starter rope can slip into the loop of the rope guide. 4 Tighten the T-knob. English - 11