Husqvarna MZ54 Owner Manual - Page 34

Engine Manufacturer Type Power Lubrication Fuel Fuel tank capacity Cooling Air filter Alternator Starter Transmission Transmission Steering control Speed forward Speed reverse Brakes Front caster tires Rear tires, turf pneumatic Tire pressure TECHNICAL DATA Frame Briggs & Stratton Cutting Width Endurance Commercial Cutting Height 25 HP 1) Uncut Circle Pressure with oil filter Number of Blades Min 87 octane unleaded (Max Blade Length ethanol 10%, Max MTBE 15%) 5 gallons / 18.8 liters Nose Roller Air cooled Sprung Seat Cyclonic Hinged Arm Rests 12v 15 amp @ 3600 rpm Service Minder Electric Blade Engagement Deck Construction ZT3100 Hydro Gear Productivity Dual levers, foam gripped Dimensions 0-8.5 mph / 0-13.7 km/h Weight 0-4.5 mph / 0-7.2 km/h Base Machine Length Mechanical Base Machine Height 13 x 6.5 - 6 Base Machine Width 22 x 10-10 Overall Width, Chute Up 15 PSI / 103 kPa / 1 bar Overall Width, Chute Down 54" (137 cm) 1½"-4½" (3.8-11.4 cm) 0 3 18¼" / 46.4 cm Yes Suspension Yes Digital Ogura GT Stamped 3.7 acres/h / 14,973 m2/h 700 lbs / 318 kg 75½" / 192 cm 42" / 107 cm 49" / 125 cm 57" / 145 cm 67½" / 172 cm 1) The power rating as declared by the engine manufacturer is the average gross power output at the specified RPM of a typical production engine for the engine model measured using SAE Standards for engine gross power. Refer to the engine manufacturer engine specifications. 34